Cannondaleriders

Over the weekend I took a look at my quad and noticed that the little valve that goes to the airbox that shoots oil into the airbox had never been put in and was dangling down. I decided to ziptie a folded paper towel to it to see if that would solve the problem. It did. So I went out and bought som...

Thanks for all the reply's, i will check those areas this weekend. I don't think it would be coming from the oil cap, but i will definitely check just in case.<br /><br />I also have a question about changing the transmission fluid. The bolt is the stock bolt, it wont come out and i dont wan...

The other day I was riding my Cannibal and looked down and noticed oil sprayed all over the passenger side/right leg side of the quad. I quickly stopped it and wiped up the excess oil. Not very much was lost. I then started it up and let it idle but no sign of leaking, so I took it out for another q...

Good news, the New O rings did the trick, i also tightened up the female disconnect on the tank. No more leaking. Thanks everyone!

I went to the autoparts store today and picked up 2-008 size rings. However they said that there not exactly certified for fuel but they have used them for fuel things before. If this stops the leaking i may buy o-rings from a parts store online. In regards to jess hammer- The fuel comes from what i...

So today when i walked out to take a look at the 4 wheeler it had the same puddle on gas on the swing arm. The O rings didn't really look that bad when i had the disconnects off. Is there anything else you can think of that it would be?

Today i took the disconnects off the fuel tank and drilled them out. Inside of the disconnects is a spring and plastic mechanism. It took me about 10 minutes on each disconnect. However once both disconnects were done and you could clearly see through them i decided to swish them in a little jar of ...

Do you think its possible to get away without putting an o ring on it? I plan on draining all of the fuel tonight, changing the fuel filter and drilling the fuel disconnects. Is there a particular size drill bit you recommend? <br /><br />Thanks again!<br /><br /><br /><br /><!--quoteo(post=2233...

Recently I have been having problems with my Cannibal. The motor is in good working order and was running good before the winter. Now when riding the 4 wheeler it seems to hesitate or lose power when I'm in the middle of getting on it. So for example I am driving it and then I gas it (wide open ...

I am looking for the Cannibal 440 decals in black/gray/silver that go on either side of the 4 wheeler.