Cannondaleriders

Is this what you are looking for?<br />The kit normally comes with a 3/8" bolt that is at least 12" long not including head... kind of hard to find but all thread works just fine just cap it off with some acorn or locking nuts. If you are worried about the strength it can be had in grade 8...

Do you just need the aluminum plugs with holes in them that go in the frame along with the long bolt?
I found that and the pro peg steel parts and can duplicate any of that if you still need them.

Its the green that is permanant and I have never had a use for it.<br />When you use the red properly it is pretty much a requirement to take a motor apart with an impact gun with impact rated sockets and bits. I start out with a good 3/8" drive gun which gets most of them out but sometimes I h...

Bill,
I will take the oil filters, sprocket nord, plugs, return strainer, shifter, fuel pump, ss oil fiter.. kind of interested in the flywheel if it is one of daves modified ones... and maybe the ecu if you have the auth code.
Ray

Without even looking at it I would bet that it is the big end rod bearing that wadded up on you. So you are looking at having to replace the crank which will cost you in the neighborhood of $500. Those piston kits you have may or may not gain you much... I have had problems with most every larg...

With all of the good stuff on there assuming it is in good shape I would say that it is well worth it. But as stated above you will need at least another thousand and some sweat equity to end up with something reliable and you will have earned your ride.

Locktite primer is really just acetone that makes sure that any oil is washed off... So a little can of that from the hardware store would last a long time and be way cheaper than the primer or brake clean.<br />Just use a small metal tin with about an inch of acetone in there and swish the threads ...

They may not have cleaned the bolts well before putting them in... they need to be perfectly clean and free of any trace oils and especially new bolts tend to have a film on them to keep from rusting. Used bolts need taken to a wire wheel and most people do not use the primer it is a good idea and o...

Since you told me twice now that you was going to send that partial refund that I was being very generous about mind you... How about packing that stuff up real nice and sending it so I don't end up totally taken dealing with you.<br /><br />BTW the next KID that comes on here all excited about ...

44 is as big as you can go and still retain the stock chain guards. Makes for a good combo with the 14t front sprocket in sand at least.