Cannondaleriders

Sorry I never noticed that the spacers were missing from when I bought it. The spacers were to adjust the rear track depending on how wide you wanted it or to compensate for different offset wheels or max width for a racing class. They are just thick washers or spacers almost anything to take up tha...

Hard to tell how bad it is from a pic and how good the porting is... yeah if it was stock I'd say junk it.<br />Regarding the 97 mm bore I am the wrong guy to ask there because I have not had any real long term success with anything but stock pistons. Some have said anything other than a stock i...

I have a stock head gone over by timbo with new valves, seals, buckets, retainers, rebuilt decomp and sticky bucket fix ready to bolt on.<br />I think I scored this particular head on ebay for $200 and lucked out with good cams. I would have to do some math on what all that work and parts cost....

It looks like that valve is more the victim of a worn out cam than a problem with the valve. It was probably not making very good power before it went.<br />It is easier said than done but if a motor looses power and you are not sure why it is time to look at the cams or at least the filter or this ...

I would hope that anyone that bids on it knows what it is and already has a D&M. It does include the key code to where they should be able to use it but I have to wonder if they will have to call to get another code for that if their computer is not back dated or something.<br />I do have one mo...

Did not know what these were going for since they are so rare... Put it up on ebay<br /> <br />Bidding starts $50 no reserve auction top bidder gets it.<br /><br /><a href="http://www.ebay.com/itm/221287789725?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649" target="_blank">http://www.e...

All sold

I use motul break in oil for a couple of short heat cycles and maybe one short ride varying the speed and load and then I change it to rotella 5w40 synthetic available from walmart and use it like I normally ride. This in my opinion the most cost effective bang for the buck oil you can get. You coul...

The idle and start up should not change much with a map change... make sure you did not forget to put the check marks on the flow rate and offset numbers from your machine specific settings instead of what the map automatically populates which tend to be very lean before you send it.

Up on ebay as the full kit no reserve auction...
ends Sunday Sep 22, 2013 20:00:00 PDT