Cannondaleriders

My igniton switch was causing some crazy things to happen. when ever it would get bumped or jiggled.

Disclaimer: I dont know a whole lot about the 500 ecu's. <br /><br />If I remember reading correctly it will run without the cam sensor... I'm having the same problem but with an s1000 ecu. After sitting a few minutes it will take back off. I'm going to change out the crank sensor and co...

I have a WWE 98MM piston kit that I purchased from Brad at Blackwidow he told me it is 14:1 compression (which I would assume is pretty close as it has some major dome to it), I decided to go a different direction with the motor and used a different piston. It comes with the matched steel sleeve and...

They are not factory connectors (which are also new).

All fuel lines are brand new due to the duel fuel set up. It can be ran on E85 or VP C12 so I had to upgrade the fuel lines. I'm thinking either coil,spark plug,spun flywheel,and will check the crank sensor could also be a pesky ground.

I made the 4hr drive to northern IA to do some ice racing. It was a very trying day, the Dale didn't want to start coming off the trailer, it finally started. I went out for practice and man does this thing run...that was the first time I have put ANY time on the new motor. Went out for the firs...

The one LLY that I did I changed the "Vane" positon to get rid off the hiss but that opens a whole other can of worms, well on a tune larger then stock. What I ran into was an "under boost" condition when on high idle. I then had to adjust the parameters on the boost scaling to g...

lope tune video

Here is a video of the LB7 I did a lope tune on, I is just for fun and gets quit a few looks and people asking how big of a cam is in that thing.

I have EFIlive and have done dsp5 switches on two d-maxs, stock/50HP(tow)/100HP/lope and a couple of other mics...tunes. I run just a straight 50HP tow tune on my dads 02 cclb dually.<br /><br />The LB7's are by far the easiest to tune the VGT LLY 04.5 and up motors are more like tunning a gas m...

Check here to download the service manual it will get you there.