Search found 527 matches

by who_gives_a6
Mon May 25, 2015 8:18 am
Forum: Powertrain
Topic: Cannibal Starter Squealing loudly, while turning over engine?
Replies: 0
Views: 571

Each time this has happened to me it was oil on the piston. Pulled the plug, covered the hole with towels, and then cranked it over. Oil shot out and then reinstalled everything and fired up. Just a small suggestion that requires 10-15mins to check for.
by who_gives_a6
Wed May 06, 2015 9:30 pm
Forum: Open Forum
Topic: Off C'Dale topic question!....AND ISSUE ON FORUM!
Replies: 0
Views: 978

Personally I'd say that your best bet would be a used silver or black edition 3+. The 3+ was a huge stepup from the older models and even the base model Hero 3. The 4 has some extra perks to it but if you just want to view videos or basic editimg the 3+ will more than suffice. I don't plan o...
by who_gives_a6
Tue Apr 21, 2015 9:10 pm
Forum: Cannondale Motorcycles
Topic: Plugs
Replies: 0
Views: 999

<!--quoteo(post=237665:date=Apr 21 2015, 06:13 PM:name=cannonman)--><div class='quotetop'>QUOTE (cannonman @ Apr 21 2015, 06:13 PM) <a href="index.php?act=findpost&pid=237665"><{POST_SNAPBACK}></a></div><div class='quotemain'><!--quotec-->I tried an E3 one time, wouldn't hardly idle and...
by who_gives_a6
Sun Apr 19, 2015 12:29 am
Forum: Cannondale Motorcycles
Topic: Plugs
Replies: 0
Views: 999

I've had incredibly good luck running the E3 plugs this year, but to each their own.
by who_gives_a6
Mon Apr 13, 2015 5:20 pm
Forum: For Sale
Topic: JERSEY REORDER
Replies: 0
Views: 1999

Good news! Payment sent for my two.
by who_gives_a6
Wed Apr 01, 2015 1:19 am
Forum: Mapping
Topic: Mapping Suggestions on duals
Replies: 0
Views: 2608

I have a similar setup with duals but also have the head ported and run the trinium map. I would think that map would be too much fuel throughout the rpm range.
by who_gives_a6
Fri Mar 20, 2015 9:26 am
Forum: Cannondale Quads
Topic: what other parts fit and work well
Replies: 0
Views: 3029

There's some parts that work with little to no modification but one I'll throw out there just because I swapped a set earlier today is the rear hubs. 400EX/450R rear hubs bolt up and gain 2" of width in the rear.<br /><br />With an LSR MX axle you only get 48" so Honda hubs put you...
by who_gives_a6
Mon Mar 02, 2015 7:24 pm
Forum: Body
Topic: 250R Kits
Replies: 0
Views: 3443

You couldn't run anything but short rides on a kit. I'm not 100% on capacity of the Walsh kit but it's easily under 2 gallons. Not a lot of room to work with to add more. The idea was designed to be able to run a 20min plus a lap or so moto and that's it basically.
by who_gives_a6
Mon Mar 02, 2015 7:18 am
Forum: Body
Topic: 250R Kits
Replies: 0
Views: 3443

I planned to build it to run with stock shocks if wanted. The reason the Walsh kit can't run them is the tank, not the subframe. The tanks outlet sticks down to where the reservoir normally goes. Could easily be relocsted and only a tiny bit of fuel supply would be diminished.
by who_gives_a6
Sun Mar 01, 2015 1:35 am
Forum: For Sale
Topic: JERSEY REORDER
Replies: 0
Views: 1999

I'll take 1 of each in large. Just tell me where to send paypal when the time comes.