Cannondaleriders

i just wanted to thank Big Winky for sharing his knowledge on the crank issues on these cannondale engines.i used to be a motorcycle mechanic about 100 yrs ago,or maybe it was back in the 70`s and i know a good guy when i talk to one.he explained to me what he knew about the crank bearings and c...

i dont really remember,i bought the pads a while back.i needed the backing plates so i would have a extra set.i make my own brake pads now.

thanks but it wasnt me,400ex will work until i can get the right one,thanks again for your reply.MIKE

thanks guys ill check it out:usa

does anyone know where i can get a front brake lever for a cannibal or if it matches up with another brand? THANKS

does anyone know why the right side crank bearings go out on these engines ?.i have seen this several times on the cannondales around here.think the bearing is to small for the load or is it because maybe the cranks arent balanced good enough

do you guys know if control arm bushings for a 250r or 400ex honda will fit cannondale arms. thanks!

i have found problem with my charging system.i thought it might help someone else with simular problem.i was checking my rectifier-voltage regulater when i noticed a slight ground on one of the yellow phase wires going into the regulater, just a slight flash on ohm meter on a high scale reading.i ho...

i need you guys to help me.my 2003 cannibal is running the battery down.i have tried 2 different batterys,it will run about 2hrs. before it runs down.i charge the batterys up on 2amp charge untill my charger kicks off,it will show about 12.6 volts.i checked all connections and stator output.at idle ...