battery not charging ?

Message

Happyboy · #11 Post by **Happyboy** » Wed Mar 17, 2004 4:39 pm

Please chime in if I mess this up guys.

You can pull the cover off the right side of the motor, thats the stator cover. Just take a look at the wires going up the left side of the stator. They go through a clip. The wires should all be shielded all of the way up past the clip. If they are not shielded past the clip then you need to yank the flywheel and add the shielding if necessary.

Sean

Derno24 · #12 Post by **Derno24** » Wed Mar 17, 2004 5:01 pm

I think you may have that one...

cdalepilot · #13 Post by **cdalepilot** » Wed Mar 17, 2004 5:13 pm

hey derno24 , where can you get the upgraded battery for 30.00

Happyboy · #14 Post by **Happyboy** » Wed Mar 17, 2004 5:34 pm

http://cannondaleriders.com/vbb/showthread...=&threadid=5147

Check that thread out. They have them, cheap.

exrider · #15 Post by **exrider** » Thu Mar 18, 2004 3:05 am

Does anyone else have any ideas?

Derno24 · #16 Post by **Derno24** » Thu Mar 18, 2004 3:39 am

Have you tried out these suggestions yet? What has happened and what have you found? Give us some feedback on things so we can help you more.

exrider · #17 Post by **exrider** » Thu Mar 18, 2004 3:58 am

i took the battery out and charged it for 24hrs and i will try hooking something up tell whats happening with the battery...i didnt get the new battery yet. If i charge the battery while its connected to the quad will it hurt anything ?

CANNIBALKID · #18 Post by **CANNIBALKID** » Thu Mar 18, 2004 1:39 pm

im no battery expert. but i dont see why it would harm anything.

Speed03 · #19 Post by **Speed03** » Thu Mar 18, 2004 2:01 pm

You will not harm the battery, or the ECU if you leave the battery hooked up to the ATV.