Posted: Sun Jan 21, 2007 6:14 pm
[attachment=2149:attachment]Is it just me or does everyone suffer with the glass part of the headlamp bulbs falling off due to vibration after a while?
Anyway, I've fixed it by replacing the whole lamp assembly with one from PIAA.
They are almost a direct swap and they actually fit the apatures better than the originals did- even after removing the foam rim so they didn't point into the clouds (this is England, we don't get sky, just clouds)
The single bolt and spacers are replaced with two shorter bolts fitted from either side and the wiring needed the connector changing.
The beam is much better for distance, but is a little narrower. They are brighter and much, much, better at high speed. They are still 37W like the stockers, so there's no charging issues.
The part number is EPSS511 for anyone interested.
Anyway, I've fixed it by replacing the whole lamp assembly with one from PIAA.
They are almost a direct swap and they actually fit the apatures better than the originals did- even after removing the foam rim so they didn't point into the clouds (this is England, we don't get sky, just clouds)
The single bolt and spacers are replaced with two shorter bolts fitted from either side and the wiring needed the connector changing.
The beam is much better for distance, but is a little narrower. They are brighter and much, much, better at high speed. They are still 37W like the stockers, so there's no charging issues.
The part number is EPSS511 for anyone interested.