I am starting to desert race and wanted to know what would be the best setup for this. I was thinking it would be close to a woods setup. The terrain I race is mainly tight trails w/lots and lots of woops, fast straight aways, and little bit of hill climbs. I think a comforatable width would be around 48". Right now it is a stock cannibal.
Thanks,
ABM
Desert setup
I would start with suspension mods, try and get a zps setup going with a set of TCS or Elkas and a rear conversion. I think that will make you faster than anything, having good suspension. The 'Dale already has the power necessary to go fast on the tight trails. Now put it to the ground and take the turns faster, and you'll be screamin.
Good luck
Good luck
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Looks like I will also have to look into some beadlocks. I just bent my stock front rim on the inside. I also need a kill switch. This is the first time I turned her over and it threw me off and turned on its side and didn't shut off. Lucky it was on its side or I would have been running to catch it. A desert seat is about double the thickness of a regular seat.
OK, more ideas.
Definetely some quality wheels. Beadlocks are great if you don't want a tire coming off the bead, but a flat is still a flat. It is all about if you want to run one flat or not, I guess. I decided that the ITP T9 Baja wheel was what I wanted. They look great and are strong and light.
Gotta have a Pingle... mine ran on its backside on the rev limiter for like 30 seconds til I got to it and from then on I swore to always wear mine :wow
A quality swingarm skid plate like a PRM.
Something I can't believe I forgot, a steering dampner! Priceless!
Tireballs ... a lot of money spent better elsewhere - unless you are a pro and your contract with Honda depends on if you get a top 5 or not, just take the bad luck of flat tires... it isn't worth a grand to me.
Desert seat - hi-flite foam. I think it is www.hi-flite.com or something close. Do a search here and you'll find info. Also find pics of Jeff Stoess' bike, he runs one for GNCC.
Give Doug a call and I bet he can outfit you with at least the wheels, Pingle, and skid, and he might have more ideas too
Definetely some quality wheels. Beadlocks are great if you don't want a tire coming off the bead, but a flat is still a flat. It is all about if you want to run one flat or not, I guess. I decided that the ITP T9 Baja wheel was what I wanted. They look great and are strong and light.
Gotta have a Pingle... mine ran on its backside on the rev limiter for like 30 seconds til I got to it and from then on I swore to always wear mine :wow
A quality swingarm skid plate like a PRM.
Something I can't believe I forgot, a steering dampner! Priceless!
Tireballs ... a lot of money spent better elsewhere - unless you are a pro and your contract with Honda depends on if you get a top 5 or not, just take the bad luck of flat tires... it isn't worth a grand to me.
Desert seat - hi-flite foam. I think it is www.hi-flite.com or something close. Do a search here and you'll find info. Also find pics of Jeff Stoess' bike, he runs one for GNCC.
Give Doug a call and I bet he can outfit you with at least the wheels, Pingle, and skid, and he might have more ideas too
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm