Picture of plummer1111 & I at the Michigan ATV Jamboree

Message
Author
MI_CDALE_Rider
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

Picture of plummer1111 & I at the Michigan ATV Jamboree

#1 Post by MI_CDALE_Rider »

Here is a picture of plummer1111 (on the left) & I at the Michigan ATV Jamboree. It was a fun time for the whole family, they did a good job for their first one. It was held at the Michigan Dutch Sports Park.


JST
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#2 Post by JST »

What is in between the 2 bars on the quad on the left?

Ryanstones
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

coool

#3 Post by Ryanstones »

I love cannondale pictures.


:usa

MI_CDALE_Rider
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#4 Post by MI_CDALE_Rider »

QUOTE
Originally posted by JST
What is in between the 2 bars on the quad on the left?


Thats plummer1111's round cannondale bar pad:)

MI_CDALE_Rider
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

Re: coool

#5 Post by MI_CDALE_Rider »

Thanks Ryan we love them too


QUOTE
Originally posted by Ryanstones
I love cannondale pictures.


:usa
:cheers: :cheers: :cheers:

TheJaspMan
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#6 Post by TheJaspMan »

Gotta love them Cdales!!

JST
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#7 Post by JST »

Dumb question but why?

MI_CDALE_Rider
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#8 Post by MI_CDALE_Rider »

QUOTE
Originally posted by JST
Dumb question but why?


Not a dumb question.... Most of us love our Cdales
because they were designed very well and as the
slogan goes "Ready to race right out o the box".
Cdales have great power which lends itself well
to racing of all sorts. The usage of fuel injection
and an onboard computer were ahead of their
time.

The negative side is some of the early issues
with parts breakage and somewhat high level
of maint. required. All new vehicles, whether its quads
cars or lawnmowers have design and engineering
related issues, its just too bad that Cannondale
went under.

Its also nice to say that your machine was built in the USA!

JST
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#9 Post by JST »

Sorry,I meant why the pad between the front bars of the frame?

TheJaspMan
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#10 Post by TheJaspMan »

I think that's his number plate.

Post Reply