Mini CNC

Message
Author
cannondale27
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#11 Post by cannondale27 »

His is a Bridgeport running Bobcam.Works great.All the programs are different and take getting used to.

GDITheman
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#12 Post by GDITheman »

Does Timbo have a CNC machine? If so, which one and how big? Maybe he can make new Dale blocks and heads from billet? wink.gif

cannondale27
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#13 Post by cannondale27 »

Its a Haas 4axis and another one.Plenty big enough to do a block or head.Wouldnt that be cool!

Smitty911
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#14 Post by Smitty911 »

Additonal research indicates that although the Sherline would work fine for me. I will probably purchase a little heavier duty maching. Still in the Micro deptartment. Seems that there are several that can be modified to CNC for under the cost of the Sherline and bring better repeatable parts to the world. Gecko Drives, steppers/servo, Cad, Cam, etc.

Alot of research pending but it should be some fun putting together. Now if I was electrically competent, I would source my own and go from there.

Smitty

Post Reply