fx 400 wiring

Message

christianmotox · #1 Post by **christianmotox** » Sun Dec 21, 2003 3:39 am

hello, i have recently got a 2001 fx400, it needed some parts, i just got a new battery, starter from a cannibal, i need the ecu wiring harnes and the clutch lever and cable, does anyone now if i can use the wiring of a cannibal bacause i cant find any parts from a fx400, does anyone have this parts?
thanks.

btolenti · #2 Post by **btolenti** » Sun Dec 21, 2003 8:12 am

I think as long as you use a harness designed for the MC500 computer you will be fine.... I think all the FX400's had the MC500, but am not sure. Anyways, I don't think you will have a problem as long as the new harness is set up for the same ECU as the original one...

btolenti · #3 Post by **btolenti** » Sun Dec 21, 2003 5:50 pm

I wonder if he could just buy a MC1000 ECU and Cannibal wiring harness for the MC1000, and just use those?????

Anyone know?

Ryanstones · #4 Post by **Ryanstones** » Mon Dec 22, 2003 6:32 am

500 wiring harnesses usually sell on ebay for less than $40. the 1000 computer and harness brings $150-200, but lacks the crank position sensor the 500's have.
I bet it would work though.

If you haven't heard this machine run, i'd expect some engine troubles.

iceracer17 · #5 Post by **iceracer17** » Tue Dec 23, 2003 2:34 am

I believe 500 computers only came on fx400's and early cannibals.I know ATK has the clutch cables,they have the shorter ones which need to be rerouted as per the bulletin.

christianmotox · #6 Post by **christianmotox** » Tue Dec 23, 2003 8:06 am

thanks,
ive been looking for the wiring harness on ebay, but no luck, anyone now who migth have one?

Ryanstones · #7 Post by **Ryanstones** » Tue Dec 23, 2003 3:41 pm

Try:

R/S performance 812-279-5833

or: EastCoastATV@AOL.com__ Phone (215) 541-4985__ Fax (215) 541-0433

or:
Phone: 413-323-7044
Fax: 413-323-4725
Email: sales@kandkatv.com

If no luck post back. Also might want to post a Wanted at Cannondaler.com