Changing coolant
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Changing coolant
I will be changing my coolant to Engine Ice and wanted to know what is the correct way to do this.
What Derno said and this: after draining the coolant (while the bolts are still out) I take a hose and spray in the fill bottle for a few minutes to flush it out, put bolts in then fill with Engine Ice, once the gurgle noise stops and it seems full, I will then put the quad in gear and lift the front end so that the coolant flows back behind the hose opening. This allows the air to escape and be filled to the true coolant level. I repeat the lifting procedure twice and just go and ride from there, it works like a charm! :usa
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm