help! please someone

Message

cannondale27 · #11 Post by **cannondale27** » Thu Nov 04, 2004 3:38 pm

Do you have or has there ever been a ProDesign kill switch on it?
Look at the wires leading to your coil and the wires where all the switches plug in.

jameson12 · #12 Post by **jameson12** » Thu Nov 04, 2004 4:03 pm

no never a pro design. i had a cheap maier on it for a while and that worked fine for a long time until the switch on the inside of it broke now i'm running a pingel but that as well is disconected

cannondale27 · #13 Post by **cannondale27** » Thu Nov 04, 2004 4:22 pm

Was the switch plugged in or was it spliced in if spliced look there.
Have you disconnected fuel pump?

cannondale27 · #14 Post by **cannondale27** » Thu Nov 04, 2004 4:26 pm

Oh man I forgot the most common one.At the solenoid you have a blue and a red small wires they get plugged into the plug with the small black wires.The other plug with the two red wires(big)goes into the plug with two red wires.

Happyboy · #15 Post by **Happyboy** » Thu Nov 04, 2004 4:42 pm

Another way to find it.....Disconnect the ECU, then stick a paperclip in the slot where the fuse goes. Then just look for flames, that will be your short.

Man, you are just going to have to pick it to death. I am guessing the solonoid, but you are just gonig to have to examine every single piece of that harness.

jameson12 · #16 Post by **jameson12** » Thu Nov 04, 2004 6:49 pm

yeah i'm thinking it's the harness somewhere because eveything else is unpluged and disconnected i'm going to pull out the whole harness tonight when i get off of work

jameson12 · #17 Post by **jameson12** » Sun Nov 07, 2004 8:24 pm

everything is disconnected and i mean everything and there looks to be no bare wires and it is still shorting out. i dont know whats going on. does anyone know of any places that work on cannondales in arizona? because i am tired of working on this thing and plus i have a warranty from a aftermarket company. the best 700 dollars i've ever spent on this bike.

jameson12 · #18 Post by **jameson12** » Sun Nov 07, 2004 10:32 pm

hey i found it:head: :clap: :eek: it was the coil. now who sells coils and how fast can i get one shipped to az?

cannondale27 · #19 Post by **cannondale27** » Sun Nov 07, 2004 10:38 pm

Are you sure its the coil?Alot of times it can be the wires going to the coil.

jameson12 · #20 Post by **jameson12** » Sun Nov 07, 2004 10:41 pm

dont know i'll go check that after dinner
thanks:mad: