Replaced your crank? Sound off.

Message

wistech · #11 Post by **wistech** » Wed Dec 08, 2004 6:13 pm

Whats the best? Thats what this thread is all about. I would bet all the options are good. We have learned so much .Time will tell. Lets keep the info coming.

Psychosis · #12 Post by **Psychosis** » Wed Dec 08, 2004 10:24 pm

ATK crank and engine work on one. Couple races and running strong.

Orginal Dale has had TWO cranks go bad. One locked up and grenaded, the other hadn't gone yet but was on the way out. I would NEVER put a stock crank in one again. ****, I wouldn't even put a fixed one b/c I've lost all trust in them. It will have a Falicon this time.

Sandstorm · #13 Post by **Sandstorm** » Wed Dec 08, 2004 11:53 pm

25 trips to the dunes equals about 90 hard as heall hrs on a WWE/ATK crank..

blaze#52 · #14 Post by **blaze#52** » Thu Dec 09, 2004 1:52 am

First stock crank went in march of 03, replaced with a stock cannondale dyno crank, it lasted one year locked up tight at the first race of this year. replaced it with a winkey crank and a 450 kit, both are holding up great after one full season.

311racer · #15 Post by **311racer** » Thu Dec 09, 2004 6:01 pm

I'm running a ATK crank installed by Haydug with about 20 hours on it. Still running strong.

The factory crank lasted for 2 1/2 years of racing and abuse.

dunnbandit1 · #16 Post by **dunnbandit1** » Fri Dec 10, 2004 1:49 am

i am gona have a falcon crank in my X440s
by summertime
hopefully my my cannible will have a
southbay moto engine with what ever
crank they use in it by summer time

bphillman · #17 Post by **bphillman** » Fri Dec 10, 2004 2:43 am

Timbo's crank has 5 hrs from me now... Just a Z400 bearing on the existing undamaged stock rod and he shaved some off the web.

MX Quad Dad · #18 Post by **MX Quad Dad** » Fri Dec 10, 2004 4:55 am

Got my Timbo crank today. just need to find time to get it back together

Braff1 · #19 Post by **Braff1** » Fri Dec 10, 2004 5:39 am

ATK crank with 450 kit. Just got it broke in with about a3 hrs of riding on it on our practice XC track.

bombsquad54 · #20 Post by **bombsquad54** » Fri Dec 10, 2004 5:45 am

will have HBR updated motor- HDC JE 450 kit- Stud update or stage 8 - z400 bearing- machined flywheel- very early 02 crank- lot-o-loctite . next week?