Winter/spring Projects
..Sure Derno24 ,i think i have one on my pc,kinda a bad pic..ill try to get some more. I talked about useing this filter
here a few months back....
...But let me tell you,i havent ran it,it is kinda a big filter,tho good for 8 to 10 mricon..i mounted useing the head light bracket,and space it tight,in fact I dont know if it will fit under head light delates..I run the stock light cover with a piece of polished aluiminan to fill in the hole,and i think it looks cool too..![smile.gif](http://www.cannondaleriders.com/forums/style_emoticons/<#EMO_DIR#>/smile.gif)
here a few months back....
...But let me tell you,i havent ran it,it is kinda a big filter,tho good for 8 to 10 mricon..i mounted useing the head light bracket,and space it tight,in fact I dont know if it will fit under head light delates..I run the stock light cover with a piece of polished aluiminan to fill in the hole,and i think it looks cool too..
![smile.gif](http://www.cannondaleriders.com/forums/style_emoticons/<#EMO_DIR#>/smile.gif)
..Its hard to see,but the sucktion side hose goes right under the oil vent line,and the exit goes right to the pump under the ECU tray. I drilled a hold threw the ECU tray to the pump.. To change te filter I think i'll have to take off the head light cover,and the "cap" or "end" of the filter unscrews tords the water flow bottol...Its a larger filter so i wont have to change it often so im not to worried about it.
..hey Derno24 i tock some more pic's but cant get them to load on here,email me and ill send them to you.. oddballracing_2001@yahoo.com
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm