Trailtech Vapor Tacho

Message

SlOoT · #11 Post by **SlOoT** » Fri Mar 20, 2009 7:25 pm

The banjo bolts are indeed pressure switches for the brakelight.

I have no idea what the mpg is. I did install a fuel reserve sensor and connected it to the red light on the handebars. It goes on when there is about 2 liters left.

I also think the gearing is off, especialy with those 18" rear tires.

SlOoT · #12 Post by **SlOoT** » Mon Mar 23, 2009 12:17 pm

The Blaze passed the inspection today. I will have the papers within 5 days and then I can get the license plate and ride on-road.

speedracer · #13 Post by **speedracer** » Mon Mar 23, 2009 1:11 pm

QUOTE (SlOoT @ Mar 23 2009, 07:17 AM) <{POST_SNAPBACK}>

The Blaze passed the inspection today. I will have the papers within 5 days and then I can get the license plate and ride on-road.

Must be nice,you guys over there are truly luck to ride on-road.Then again,I would have a boat load of tickets if I could get on the street!

kdeal · #14 Post by **kdeal** » Mon Mar 23, 2009 2:02 pm

QUOTE (SlOoT @ Mar 19 2009, 06:17 PM) <{POST_SNAPBACK}>

And also a screw in the throttle to make it 15Kw.

What is the screw in the throttle for?

NRath · #15 Post by **NRath** » Mon Mar 23, 2009 4:15 pm

QUOTE (SlOoT @ Mar 23 2009, 08:17 AM) <{POST_SNAPBACK}>

The Blaze passed the inspection today. I will have the papers within 5 days and then I can get the license plate and ride on-road.

Now you're just rubbing it in!!!!!

QUOTE (kdeal @ Mar 23 2009, 10:02 AM) <{POST_SNAPBACK}>

What is the screw in the throttle for?

I think he's limiting the revs to limit the hp --> 15kw = 20.1 hp.

SlOoT · #16 Post by **SlOoT** » Mon Mar 23, 2009 5:43 pm

Yep, it's to limit the power. For some reason quads aren't allowed to have more then 15Kw.

But at the inspection they didn't even check that, haha. They did not even test the sound. They did not even check the brakes

All they did was check the VIN number and the lights, lol.

But sometimes they check everything, just depends on which inspector you get.

alexw1991 · #17 Post by **alexw1991** » Tue Mar 24, 2009 2:53 am

That would be cool to ride the dale to work! I do agree with speedracer about the tickets

SlOoT · #18 Post by **SlOoT** » Tue Mar 31, 2009 7:36 pm

And the speed is almost ready

SlOoT · #19 Post by **SlOoT** » Sun Apr 19, 2009 9:37 pm

Today I received the papers for the Speed

Gonna get the plates tomorrow and then test ride time, woohoo!!! Its got a 14/36 gearing, hopefully that's gonna work better then the stock 13/42 the Blaze has.

speed 450mx · #20 Post by **speed 450mx** » Mon Apr 20, 2009 9:49 pm

not to be a smart a$$ or anything

but you know to watch the chain giude on the swingarm because the 13 sproket eats into to it preaty quickly and will eat into your swingarm. Just making sure so you dont have that problem. All your quads look great and it look like a blast to ride on the street!