Page 4 of 12
Posted: Mon Feb 28, 2005 11:23 am
by Derno24
Claas900 I also like the fuel filter you are using. Anyway you can post a closeup!
Posted: Mon Feb 28, 2005 3:41 pm
by claas900
..Sure Derno24 ,i think i have one on my pc,kinda a bad pic..ill try to get some more. I talked about useing this filter
here a few months back....
...But let me tell you,i havent ran it,it is kinda a big filter,tho good for 8 to 10 mricon..i mounted useing the head light bracket,and space it tight,in fact I dont know if it will fit under head light delates..I run the stock light cover with a piece of polished aluiminan to fill in the hole,and i think it looks cool too..
Posted: Mon Feb 28, 2005 3:46 pm
by claas900
..Its hard to see,but the sucktion side hose goes right under the oil vent line,and the exit goes right to the pump under the ECU tray. I drilled a hold threw the ECU tray to the pump.. To change te filter I think i'll have to take off the head light cover,and the "cap" or "end" of the filter unscrews tords the water flow bottol...Its a larger filter so i wont have to change it often so im not to worried about it.
Posted: Tue Mar 01, 2005 12:33 am
by CDMX215
this is my project
Posted: Tue Mar 01, 2005 2:05 am
by claas900
..see if this works
Posted: Tue Mar 01, 2005 2:10 am
by claas900
..hey Derno24 i tock some more pic's but cant get them to load on here,email me and ill send them to you..
oddballracing_2001@yahoo.com
Posted: Tue Mar 01, 2005 2:18 am
by CDMX215
here is another had to have it resized
mistake
Posted: Tue Mar 01, 2005 2:21 am
by CDMX215
try this again
Posted: Tue Mar 01, 2005 3:02 am
by Lippy91
Sweet!!:drink:
Posted: Tue Mar 01, 2005 3:05 am
by speed_demon
I love polished frames:head: ! I just don't have the time or patience to do mine.