After waiting forever for Kibblewhite valves, Haydug is sending my 468 cc engine home tomorrow.
The scary thing is I have completly forgotten everything I learned about Cdales.
What are some key things I should do or not do while re-installing the engine? I don't want to do or forget something stupid while installing the engine.
Thanks
My engine is coming home!
congradulations:clap:
unfortunately i have had mine in and out so many times it comes natural installing it so im not sure if i remember to look for anything..lol
dont forget the dielectric grease on the connections take your time and make sure all your connections are in the right place and secured properly.
use star washers on all your grounds and battery cables.
make sure coolant is bled and that the bleeder hose if applicable is functioning properly.
make sure you get the throttle body boot on all the way i have seen alot of people fudge this up.
dont be like me and hit the start button crack the throttle wide open dump the clutch and take off like a raging lunatic.atleast let it come to an idle.
j/k brake it in properly.
unfortunately i have had mine in and out so many times it comes natural installing it so im not sure if i remember to look for anything..lol
dont forget the dielectric grease on the connections take your time and make sure all your connections are in the right place and secured properly.
use star washers on all your grounds and battery cables.
make sure coolant is bled and that the bleeder hose if applicable is functioning properly.
make sure you get the throttle body boot on all the way i have seen alot of people fudge this up.
dont be like me and hit the start button crack the throttle wide open dump the clutch and take off like a raging lunatic.atleast let it come to an idle.
j/k brake it in properly.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm