Ride
Posted: Tue Sep 13, 2005 12:56 am
[img]http://us.f1f.yahoofs.com/bc/7b6f4ced/bc/Cannondale/Picture2+069.jpg?bf4biJDBPtYQ3QyA[/img]
Cannondaleriders
A safe place for quads older than the owners
https://cannondaleriders.com/phpbb/
Ride
https://cannondaleriders.com/phpbb/viewtopic.php?f=16&t=11967
Page 1 of 3
Posted: Tue Sep 13, 2005 1:00 am
[img]http://us.f1f.yahoofs.com/bc/7b6f4ced/bc/Cannondale/Picture2+072.jpg?bf4biJDBg..VbP64[/img]
Posted: Tue Sep 13, 2005 1:01 am
[img]http://us.f1f.yahoofs.com/bc/7b6f4ced/bc/Cannondale/Picture+067.jpg?bfouiJDB.Ve3ms5G[/img]
Posted: Tue Sep 13, 2005 1:03 am
[img]http://us.f1f.yahoofs.com/bc/7b6f4ced/bc/Cannondale/Picture+068.jpg?bfouiJDBW1E.h0Lb[/img]
Posted: Tue Sep 13, 2005 1:04 am
[img]http://us.f1f.yahoofs.com/bc/7b6f4ced/bc/Cannondale/Picture+069.jpg?bfouiJDBgme5vREN[/img]
Posted: Tue Sep 13, 2005 1:04 am
only the last pic is working for me, but that intake is freaking sexy, and looks to have no real restriction. did you weld the pipe yourself?or steal an intake from a car or something?
Posted: Tue Sep 13, 2005 1:08 am
Ok, you've all seen her from the outside, and now that I have the power to put up pics BRU HAHAHHAHA, I can show you all what she looks like naked. I modified small things but did it alot, I put the fuel pump under the ecu tray you see there. Got rid of the plastic peices for the air box and created a cold air intake. I'd love to get this thing on a dyno to see what kind of hp gain I have. I know its some, theres diffently a seat of the pants difference in it and a stock air box. Sorry it took me so long Cannondale27, its been a fight to get this stupid camera to downlaod. I ended up getting a different camera to get the job done.
Posted: Tue Sep 13, 2005 1:14 am
That intake started as a flat piece of aluminum. I rolled it formed it and welded it. I put it on and it was about an inch to long, so I had to cut it and reweld, the second time around I didnt grind the welds down, got in a hurry, and you have what you see. Its a very tight fit, the K&N takes up all the room. I can't roll anything smaller than 3", so that the size it ended up. I would bet you could use a cold intake off a car, I just wanted it hand built.
Posted: Tue Sep 13, 2005 1:37 am
Yeah its pretty well the same with the plastic on or off. I biult this thing last April and have been playing with it since. I like everything about it, I ended up changing the injector settings less than what I thought it should have been. I went another 50 rich flow rate, and .2 offset off of stock. It still isnt perfect, but its close. I'm going to invest in a AFR meter like what you have and a map editor, then I'll be able to see better how much more air I'm pulling. I have come up with an easier way to make them, but I havent got the details worked out. This thing took me about 100hrs to build so its not a cheap deal, so a cheaper way to biuld it is a must to put them into production.
Posted: Tue Sep 13, 2005 3:03 am
no pics are showing for me 