heres some pics of a blaster i bought for my cousin so he could go riding with me and went out a couple of times and i could see it was not going to cut so, i looked around the garage and with a bunch of spare yfz, raptor and a good yz250 motor, so after streching the frame and adding a ton of new mounts and alot of gusseting then building a swingarm. here it is and its very quick doesnt get the dale out of the hole but after 2nd it passes it very easily and keeps going and the whole thing was done with the price of the blaster for a little over 2000.00 dollars. let me know what you think.
project finished
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
it had no chance in **** before with ported 240 in it now its got a stock yz250 that wasnt even jetted yet with the new pipe and open k&n and was running very slugish and still out pulled the dale and that is a fully updated higher compression mildy ported 450 with a moto/speed map and it goes very well. cant wait to see it jetted.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm