Page 1 of 2
A surprise in my fx450
Posted: Mon Jan 16, 2006 1:15 am
by chigger81
Yesterday I decided to repack my cannoharley to make it a little quieter. I took the exaust off to find this:
Yes, its popcorn. I guess the mice got into the popcorn in the office of my shop and decided my dale looked like a good place to store it. At first I was kinda worried about it, but I guess it probably wont hurt anything and its kinda funny. Somewhere there is a little black mouse that needs to die.
Meanwhile I found out the core is destroyed in my pipe, so it looks like more down time before I can ride again. Theres always next weekend. Not sure how many more of these 60 degree january days im gonna have though.
Posted: Mon Jan 16, 2006 1:57 am
by Derno24
Slap that exhaust on and ride!
Posted: Mon Jan 16, 2006 4:10 am
by JST
Just throw the shop vac tube near it.I had them little ******** do the same thing to a Blaster we had but,I actually didn't find out until I kicked it over a couple times.
Posted: Mon Jan 16, 2006 10:09 am
by cannondale27
Shop vac is a good idea you can also tape a small hose like your vent hose to the nozzle and suck out the cylinder.You can see the exhaust valves are slightly open by the shinny stem at top.Something may have got past the valve.Worse yet is the dirty buggers like too pee also and the stuff is nasty!You would smell it if thats the case though.
Posted: Mon Jan 16, 2006 4:46 pm
by cdaleman440
i ike popcorn:eek:
Posted: Mon Jan 16, 2006 8:24 pm
by Craig_C
Speaking of exhaust leaks!
after my tear down I found no (no, zippo, nada) exhaust crush washers. I also had no leak :confused: Anyways, Theres washers in ther now, no pop corn, but how I ever didnt have any leaks beats the crap out of me!
Posted: Mon Jan 16, 2006 11:56 pm
by theJeStEr1340
heh, I have a top secret pipe going on my bike after it's rebuild, It is very sturdy and a tad bit bigger than my hmf Was. I would like to knwo the Id of the Black widow pipe to compare it. I will see how it compares to the black Widow exhaust and then may let the cat out of the bag.
Posted: Tue Jan 17, 2006 12:28 am
by cannondale27
Chigger how come you call it a cannonharley?
Posted: Tue Jan 17, 2006 2:06 am
by chigger81
There was no packing and only half a core left in the pipe, so it sounded a bit like a high strung harley.
I stood it up and hit it with the shopvac after that. I tried going down to a smaller hose like you suggested. I couldnt quite make the turn with it, Im gonna look for some more flexible stuff to get down there with.
cdaleman440, you can have some of the popcorn after I start it.
Posted: Tue Jan 17, 2006 5:06 am
by theJeStEr1340
QUOTE
Originally posted by chigger81 There was no packing and only half a core left in the pipe, so it sounded a bit like a high strung harley.
Sounds like my dad pipe, it was a titanium system, cut in ahlf with no packing or core!