Fuel hoses

[twisted]

On the right of the quad, the fuel return line has a nice gash in it and gas is spilling out... Where can I get a new one?

[cdaleman440]

well i got my stuff at adavane auto zone

[Happyboy]

Just get good Fuel injector hose. Be sure to tell them its EFI. Normal hose can't handle the PSI. And get good crimp clamps.

[Canniboomer]

The thin OD stuff is nice for that tight connection at the regulator. I have the OEM-sized high psi hose $2/ft, or the narrow stainless braid teflon $3.50/ft, and clamps, clamp-pliers, sleeving, or a kit, etc. pacrimdm@msn.com

fyi, that damage can be caused by the wire clamp at the valvecover nipple, or a sharp ear from an oetiker clamp, just depending your tank and routing. It's good to keep the bulges of any clamps positioned away from potential rubbing.

[acarli3]

hmmmm. Boomer....PM me the price for a kit.

[banzairx7]

No autoparts store carry this hose. It's 1/4" ID and the smallest anyone carries is 5/16" in the high pressure fuel hose. I need some for mine but gave up the search.

edit: just found a 25' roll here for $92!

http://www.partsamerica.com/ProductDetail....artnumber=65151

[cannondale27]

Here is another source for sleeving
http://www.varflex.com/

[banzairx7]

Mcmaster car has the oem style sleeving on page #737. I think it's part #6172T13. Not sure of the exact ID we need.

[twisted]

Not really looking for much, stop setup would do fine. Just mine is pooched out.

[cannondale27]

Thats just it the stock hoses start cracking in about 2 years.