Page 1 of 2
Posted: Sat Mar 01, 2008 2:32 am
by theJeStEr1340
I am talking with CV-4 to get colored radiator hoses made. they need anywhere from 75-100 to break even and colors need to be made in batches of 25-40. check out their site www.cv4.net I am first going to send them a set of our radiator hoses and see if they don't have any that could be cut to fit, thanks to Neil or cdale55. I will keep everyone posted.
Posted: Sat Mar 01, 2008 2:39 am
by Sand_Blaster
I'm down for some blue fo shizzle.
Posted: Sat Mar 01, 2008 9:02 pm
by SlOoT
Red would be nice.
Posted: Sat Mar 01, 2008 9:42 pm
by MyCannibal
how about clear?...that would look cool...
Posted: Sat Mar 01, 2008 10:56 pm
by Blasterboy11
id be in for any color, i actually asked them about this a while back, they sent me some dealer brochure with stickers, booklets, and all sort of stuff. Even those cool stick on thermometers...
Posted: Sun Mar 02, 2008 2:33 am
by cannondale27
There must be some that could be cut to size for ours?
Posted: Sun Mar 02, 2008 4:23 am
by theJeStEr1340
There must be some that could be cut to size for ours?
That will be looked into as soon as I get the hoses next week.
Posted: Sun Mar 02, 2008 3:57 pm
by thedeatons
The Muzzy Kawasaki team used to use the clear heat rated hoses with the white high pressure netting built into them, the kind you get at Lowe's, and then fill them with bright green coolant. Something like that should suffice and cost about $20. Then run water and whatever dye additive you wanted.... Colored fluid would look neater than colored hoses, in my opinion. But, I am all for more Dale aftermarket!
Posted: Sun Mar 02, 2008 11:47 pm
by theJeStEr1340
The Muzzy Kawasaki team used to use the clear heat rated hoses with the white high pressure netting built into them, the kind you get at Lowe's, and then fill them with bright green coolant. Something like that should suffice and cost about $20. Then run water and whatever dye additive you wanted.... Colored fluid would look neater than colored hoses, in my opinion. But, I am all for more Dale aftermarket!
The problem with those is they are not bent, that is what makes these hoses "special" that 180 degree bend from the coolant bottle to the radiator would kink and so would a few others.
Posted: Mon Mar 03, 2008 12:51 pm
by MyCannibal
I dont think it would kink...u could just make the hoses that bend a tad bit longer.