Page 1 of 3
help me southbay riders
Posted: Thu Sep 18, 2003 8:57 pm
by cannibalq8
hi
didnt want to start directly... i re-calibrate many many time. the fuse damage 2 time... call optimum and check the reads of everything..just once it work 45 min then its stop suddenly many many time and hard starting. but now it didnt want to work and the battery is died (i bought it new yesterday ) (((((((((((((
IM VERY DISAPPINTED ..GUYS ..PLEASE HELP ME
Posted: Thu Sep 18, 2003 10:15 pm
by Sandstorm
Mine is at my dealer. When I find out whay they did I will pass it along.. Should have it tomorrow..
Posted: Fri Sep 19, 2003 1:11 am
by cannibalq8
it also backfiring and popping while it run ( after many many hard starting )..... im waiting for reply ..sandstorm
((
Posted: Fri Sep 19, 2003 2:52 am
by Derno24
It sounds like fuel injection settings. I am guessing by your popping that the bike is running lean. I had a similar problem with the regular motor. After spending about an hour on the phone with scooter from optimum I figured it all out. If you guys need a hand let me know.
Posted: Fri Sep 19, 2003 2:29 pm
by cannibalq8
i called scooter yesterday and we checked everything . ( i have the dm tool kit ). he told me that everthing is ok ( no problem with the setting ).i think the the mixture fuel/air is wrong ( it seems that the air is going more that the fuel or the fuel is not enogh ) could be the fuel filter ??
i heard that two words many time here ( lean and rich ) .. what's the meaning ( lean and rich )??
tjanx
Posted: Fri Sep 19, 2003 3:06 pm
by thomez
Lean means not enough fuel for the amount of air.
Rich means the opposite, too much fuel for the amount of air.
Backfiring as you described usually indicates a lean condition, from what I have read.
Hope this helps.
Posted: Fri Sep 19, 2003 3:58 pm
by Derno24
Yeah you are running lean. Did scooter explain how to adjust the settings so you can make the mixture richer? That is what you need to do.
Posted: Fri Sep 19, 2003 4:12 pm
by jake1981
This may sound stupid, and it did when it was the problem on my Cannibal. Check and replace the voltage regulator. Mine kind of did the same thing and it was a bad voltage regulater. Also check all your grounds.
Posted: Sat Sep 20, 2003 7:06 am
by cannibalq8
i increase the inj offset as scooter told me and still no change ...very hard starting and if start still backfire and stop suddenly
Posted: Sun Sep 21, 2003 3:48 am
by Sandstorm
My dealer didn't get to my motor yet. I'll be calling on Monday..