Cannondaleriders

Rear sprocket on the cannondale does it have the same bolt pattern as the 400ex? Going with 18in tires thinking about running a 14/40 gearing. thanks

I think so. I know they're the same as a 250R. Unless your running on a slow track, I'd recommend going with a 14/38. I run on faster tracks and it does fine. Plenty of power and speed.

14/40 gearing would be a good chocie for slower and more technical tracks, and for sx tracks like i run im running 14/42 and then i run my 14 39 for larger mx tracks

yes a 400ex sprocket will work have one on my quad now

fronts are the same as ktm i have heard

..Whats stock,42th?...Im looking for a 44th,were could i get one?..I went up one on the front and was told 3 bigger in the back puts it back to stock?..So im looking for a 44th..

go to www.rockymountainatv.com they usually have real good prices on sprockets and reallly just about everything

..Yea i called them about a month ago,no luck..I even told her hondas were the same,still no luck on one that big...Thanks

I had checked into the 44t awhile back and the only place that had them available was Sprocket Specialists and they listed $68 if I remember correctly just for the alum version! I didn't even bother w/asking for other compounds of them but it was also a 3-4 week waiting period on one I was told.

..T/y..ill give them a call

I usually run 14/38 gearing, with good results. I also have a 42 incase a super tight track. I have sprockets for these. I'm going to try a 15t front later, should provide more torque over the rear wheels.

Thanks for the info guys. Hey Yamawarr0121 what gearing do you run at atco and have you every race at MT.pleasant moto cross in woodbine? If so what gear did you ran there thanks.