Page 1 of 1
My two RIDZ
Posted: Mon May 17, 2004 6:49 pm
by ABM-CANNIBAL
'02 CANNIBAL & 93' 300EX
![](http://www.imagestation.com/picture/sraid116/pb7378536c59286550b99bda9c145cb5d/f8abe9e0.jpg)
Posted: Mon May 17, 2004 6:50 pm
by ABM-CANNIBAL
CANNIBAL CLOSE UP
![](http://www.imagestation.com/picture/sraid116/p20bbb5e81e73a1255431069d94702d80/f8abeb88.jpg)
Posted: Mon May 17, 2004 6:51 pm
by ABM-CANNIBAL
CUSTOM RIM CLOSE UP
![](http://www.imagestation.com/picture/sraid116/p428b0ae27920248cb02e2027efb41c48/f8abeb19.jpg)
Posted: Mon May 17, 2004 6:52 pm
by ABM-CANNIBAL
300EX CLOSE UP
![](http://www.imagestation.com/picture/sraid116/pafe05fbd590c8712577c2689a7d4411f/f8abeabd.jpg)
Posted: Mon May 17, 2004 6:53 pm
by ABM-CANNIBAL
A$$ SHOT
![](http://www.imagestation.com/picture/sraid116/pb2b80d6ce2f12c0e05d4837bf0f20a35/f8abea11.jpg)
Posted: Mon May 17, 2004 7:08 pm
by CdaleRacer0128
didy ou throw on the whole cannibal front end to that 300ex? i tried doin it to my friends but he said it wuoldn't work..did you have to drill out the spindles or anything? and you used a shock locator too, right? or what didyou do?
or am i blind and they aren't even the cannibal front shocks..:confused:
Posted: Mon May 17, 2004 7:25 pm
by ABM-CANNIBAL
On the 300ex I got a shock relocator on E-Bay and put Cannibal Arvin Shocks on it. Just had to change the upper bushing. It still has the stock a-arms.
Posted: Mon May 17, 2004 7:51 pm
by Ryanstones
Nice quads man!:head:
Posted: Mon May 24, 2004 7:02 am
by bknight
ABM-CANNIBAL
we just did some mods for my wifes 300.
full exhuast, K&N filter, rev limter ,Main jet 130, piolet 40 still hesitates to start and alittle blobery. Should I go up on the poilet?
Posted: Mon May 24, 2004 1:32 pm
by ABM-CANNIBAL
bknight, I'm not sure on the jetting. I am still trying to get mine dialed in. I started at a 132 main and probably need to drop down to a 128.