Cannondaleriders

Throughout this forum is scattered info on where to find specific parts. I thought I would start a thread to keep track of them, maybe we can post the list in the FAQ section.

Stock/Replacement parts
Engine Mount update - Quadsource
Oil Filters - YZ426 glue o-ring
Stainless Oil Filter - Scotts makes them, available at R&S
Fuel Filter - WIX 3011? - NAPA Gold 3011
Air Filter - K&N - ?
Brake Rotors - same as DS650 ?
Brake Calipers - same as DS650
Plastic - Cyra makes stock
Steering Stems - Arens
Key/kill switch plate - Arens
Tie Rod boots - Quadshop
trans gears or shafts - sales@hanovergear.com
outer clutch baskets - sales@hanovergear.com
starter gears - sales@hanovergear.com
timing gears - sales@hanovergear.com
balance shafts - sales@hanovergear.com

Aftermarket Upgrades
A-arms - Houser, Gibson, LSR, American Star
Steering Dampers - Scotts, Ohlins, Denton
Shocks - everyone
Wheels - honda bolt pattern with 4/1 offset
Engine upgrades - South Bay Moto, Trinity
Exhaust headpipes - HMF, Trinity, South Bay Moto
Silencers - HMF, Trinity, Big Gun

ADD TO THE LIST!

Just heard that the Quadsource has an Engine Stud Update kit that includes the gasket.

A few more I forgot on the first post

Bumpers - AC, PRM
Nerfs - AC, Graydon
Skid Plates - PRM

Bumpers and Skids : Graydon
SS oil filters : http://www.americandirtbike.com
Air Filter : Twin Air
Exhaust (head pipe and silencer) : Graydon
Side Covers : RIS Designs
Rad Scoops : PC Products, OMF
Seat Covers : www.atvseatcovers.com
Kill Switch : Pingel

Titanium axles-RAD
Wave rotors-RAD
Bearing carriers-RAD

I've added all the updates and a few more I thought of


Air Filter - K&N, Twin Air
A-arms - Houser, Gibson, LSR, American Star, Walsh Racecraft
Axles - RPM. Lonestar, Durablue, RAD
Balance shafts - sales@hanovergear.com
Bearing Carriers - RAD
Brake Calipers - same as DS650?
Brake Lines - Galfer
Brake Rotors - Hardkor, RAD. Stock DS650
Bumper - AC, PRM, Graydon
Clutch Cover - RIS
Clutch baskets (outer) - sales@hanovergear.com
ECU - Optimum Power
Engine Mount update - Quadsource
Engine Stud update - Quadsource
Engine upgrades - South Bay Moto, Trinity
Exhaust (headpipes) - HMF, Trinity, South Bay Moto, TC Racing, Graydon
Exhaust (silencers) - HMF, Trinity, Big Gun, TC Racing. Graydon
Fuel Filter - WIX 3011, NAPA Gold 3011
Fuel Pump - Optimum Power
Gas Cap - RIS
Kill Switch - Pingle
Kill switch plate - Arens
Hoods - Quadtech
Hubs - Hardkor
Nerf Bars - AC, Graydon
Oil Filters (paper) - YZ426 (glue o-ring)
Oil Filter (stainless) - Scotts, Dual Star, http://www.americandirtbike.com
Oil Filter Cover - RIS
Plastic - Cyra, Fullbore
Radiator Scoops - OMF. PC Products
Seat Covers - www.atvseatcovers.com, Nac??????????????????s, Quadtech
Shocks - Elka, Axis, PEP, Ohlins, Works
Skid Plates - PRM, Graydon
Starter gears - sales@hanovergear.com
Stator Cover - RIS
Steering Dampers - Scotts, Ohlins, Denton
Steering Stems - Arens, Houser
Swingarms - Walsh Racecraft
Tie Rod boots - Quadshop
Timing gears - sales@hanovergear.com
Trans gears or shafts - sales@hanovergear.com
Wheels - ITP, Douglas, Hiper (Honda pattern, 4/1 offset)
Keep Em Coming!

Brake pads

Fronts EBC FA121
Rears FA181

(These are the ATV pads, gonna have to do some digging on the bike parts)


BMW


PS You can get the Airfilters from No-Toil, and the fuel filters from Meijer(they are only $1.38 ea here in IN ordered at meijer)

Lonestar makes a nice swingarm.

I've found alot of people out there that have access to OEM parts. One guy is going to be having an auction here in the next month or so of ALOT of stuff. I'll keep ya updated, a couple of dealers will be going and purchasing some goodies.


Ben or Joe, can you make this a sticky?

Cometic now makes this gasket.

I read in another forum that you can get the counter shaft sprocket from Sprocket Specialist and that the rear sprocket is the same as a trx 250r. Also, the chain roller is the same as a 98-2001 CR250.


Terry

2003 moto