Page 1 of 2
gearing?
Posted: Tue Apr 05, 2005 2:21 am
by 440speedrider
I have a timbo stroker motor with a 450 kit, and all the other goodies, and i was just wondering what gears i should run with 18in tires?
Posted: Tue Apr 05, 2005 2:30 am
by USAMoto00
I have a stocker and run 14/40. With that 450 maybe 14/39 or 38 would better.:usa
Posted: Tue Apr 05, 2005 3:14 am
by jfarrar
what type of riding do you do?i bet that thing would pull a 15 no problem.
Posted: Tue Apr 05, 2005 4:13 am
by wistech
I think I recall timbo running a 15 front and 39 rear. He said it pulled 93mph.
Posted: Tue Apr 05, 2005 4:21 am
by Jaybr
I run 14/38 with my Falicon stroker with 18's, BUT I never changed the gearing for Glamis with 20" paddles and it pulled them no problem. You could probably do fine with a 15 front.
Posted: Tue Apr 05, 2005 4:14 pm
by 440speedrider
thanks fellas
Posted: Fri Apr 08, 2005 10:45 am
by Derno24
We ran a 14/39 or 40 for the 6hr machine and it had plenty for all situations. Maybe even too much in the tight stuff. I kinda like that gearing for all machines.
Posted: Fri Apr 08, 2005 3:39 pm
by aroracer72
Im running 14/39 with 18inch rear tires.
CHAD
Posted: Sat Apr 09, 2005 5:33 am
by Psychosis
QUOTE
Originally posted by KRMit
Is there even enough clearance to run a 15t? All I've been able to find are 13t and 14t.
I've heard some say there's a 15t but why not just get a rear. Go buy a 400EX one at like 38t and put it on. Fits right on perfectly and does about the same.
BTW: I switch to 14-38 on the ATK and it pulled it just fine. Will be running the same w/Timbo stroker.
Posted: Sat Apr 09, 2005 12:19 pm
by jfarrar
the 15 are hard to find unless you use the ktm ones.i ran a 15/39 on mine and it pulls it well but i had to pull it back off for the tight indoors but now the sun is shining it will be going back on.there is room for it up front but not sure with the aftermarket chain case savers.