250R Beadlocks, FMF, +2 axle, more

Message

quadridermx · #1 Post by **quadridermx** » Fri Sep 23, 2005 2:12 am

Up for sale are some 250r parts I got as extras with the last 250r I had...

1) Rear 10" ITP Beadlocks with 18x11x10 Holeshots. Beadlocks in good shape, backside of rim is dented around the edge, but still seals no problem. More cosmetic than anything. Holeshots are just about brand new, 1 is perfect, 1 has a cut in the side and will need a tube - $135 for the set

2) Front 20.5x7x10 Hoosier tires mounted on stock reversed (give about an extra 3 inches width) Honda rims. Tires have lots of tread left but have some dryrot from sitting. However, they already have tubes in them so they're ready to go - $75 for the set

3) FMF Fatty pipe with Power Core 2 silencer in ok shape. Pipe has a couple dents, but should still be runable - $75

4) Set of stock A-arms. No cracks or bends whatsoever No top (removeable) ball joints, but bottoms are in good shape. Black bottoms, tops are some kinds of awesome annodized blue metallic color, very eye catching! Comes with bushings in good shape - $65

5) +2 Axle, not sure by who. Comes with rear hubs in mint shape. Has the spacers on the splines, so can be adjusted back to stock. Perfectly straight, no bends, very solid axle. Also comes with sprocket hub - $100

6) Swingarm, was told it's an aftermarket unit, but don't know who made it. In good shape, very solid no cracks or bends at all. Comes with bearing carrier and bearings, but just assume bearings will need replaced since I haven't tested them - $75

7) 2 10" Aluminum reinforcing rings for a set of rims... Instead of paying big money for a set of reinforced fronts or rears, weld your own reinforment rings onto your set of rims! It's the basic circular design with the holes cut out every 3 inches or so - $25

All prices do not include shipping, but it shouldn't be too bad for any of them through DHL. Will sell all parts as a lot for $425. Contact me at quadridermx@juno.com if you'd like pictures of any of the parts. Would also trade the parts for a nice laptop!

azcannon · #2 Post by **azcannon** » Sun Sep 25, 2005 8:29 pm

I will take the wheel rings my zip is 85053 pm me a total with shipping please

I need a cdale · #3 Post by **I need a cdale** » Mon Sep 26, 2005 11:35 pm

is it a stock axle with spacers?

CannondaleRider · #4 Post by **CannondaleRider** » Mon Sep 26, 2005 11:52 pm

QUOTE

Originally posted by I need a cdale
is it a stock axle with spacers?

I'm pretty sure its an aftermarket adjustable axle

quadridermx · #5 Post by **quadridermx** » Tue Sep 27, 2005 12:35 am

Axle and reinforcing rings are sold

kbrown · #6 Post by **kbrown** » Sat Oct 08, 2005 2:41 am

Ill take the beadlocks if you still have them

azcannon · #7 Post by **azcannon** » Sat Oct 08, 2005 6:53 am

Hey dude its been a while am I gonna see those rings soon ?