03 Cannondale Speed +2 chassis and tons of parts everthing is going
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
03 Cannondale Speed +2 chassis and tons of parts everthing is going
Everthing goes sale need the money fast and sick of hassesing with ebay.
Cannondale
03 cannondale Speed titled
Ohlin shocks all the way around
Motor mount update
Oil line update
Tie rod end update
Bills pipe
Ac racing skid plate swing arm
Ac racing nerf bars pro peg head guard from black widow
New chain and sprockets
New swing arm, wheel and axle bearings.
Atk updated motor by TIE in Utah with about 30 hours on it
i got the motor in september and we get snow up here so i havent got more then one good ride on it other then breaking in the motor
Speed Moto map
Balanced clutch system
Balanced cranks
Z400 bearings
Everything loctited
New clutches
New valves and cams
New valve cover
extra parts
Two Cannondale Speeds missing motors, computers, rims, tires, and front shocks.
One frame title from nacs racing
other one dosnt have a title
Frame
2 02 frames
2 sub frames
2 engine cradles
1 02 steering stem
1 03 steering stem
Front Suspension
3 sets of stock a arms one new in bags
2 sets of spindles
2 sets of front hubs one red moto other is black
2 set of stock front speed brake rotors
2 complete front brakes systems
3 sets of tie rods with ends
2 extra front brake lines
1 stock steering stem bearing
1 after market steering stem bearing and holder
2 sets of front wheel bearings and seal
5 sets of brake pads
Rear Suspension
2 swing arms one new one old
2 rear ohlin shocks
2 complete rear brakes
2 stock rear speed rotor
1 stock bearing carrier with good bearings and seals
1 lonestar bearings carrier with good bearings and seals
1 stock axle
1 dura blue +2 +4 axle
2 set of rear hubs
6 rear sprocket hubs
2 axle nuts
3 sets of stock skid plate
1 set of new swing arm bearings and seals
4 new chain
20 new rear sprockets sizes form 36 o 42 tooth
4 new front sprockets sizes 13 to 14 tooth
Electrical
3 sets of head lights
3 wiring harnesses
1 starter
1 tail light
4 starter solenoids
Motor
2 throttle bodies with sensors
1 titanium stock moto full exhaust system
1 wiley company full system shortly exhaust
1 engine case with hydro clutch
1 side cover
4 full hydro clutch systems
5 set of injectors
2 fuel pumps
2 fuel regulators
2 sets of fuel hose
2 complete clutch fibers and steels
2 complete radiators with hoses
5 stock filter with cages
2 black widow air filter still in bags
Body
1 red front cannible
2 silver front fenders one moto graphics other custom moto graphics
1 custom painted race cut front
3 sets of side silver spares
1 set of black side spares
2 silver motor rears
1 custom painted dune cut rear to go with dune cut front
1 moto stock seat
1 stock moto number plate
2 sets of black head light covers
1 set of red head light covers
1 set of red head light delets
1 ac racing grab bar
1 ac racing 6 pack rack
2 stock grab bars
2 stock front bumpers
1 ac racing front non screened bumper
1 ac racing front screened bumper
2 computer trays
3 air box bottoms with sensors and stacks on has short stack
1 air box lid2 air filter holder
2 old style tanks with caps
3 battery trays with clamps
1 set of x5 bars with hand guards new grips
1 set of t2 with cyra hand guard and clamps new grips
bought out a dealer back in 03
have all the deal er books
mechanic guide
fuel injection book
mapping book
electrical book
parts book
update book
optinum book
2 stock owner manuals
ton of new and used part some stil in packages everhting i got for quads is yours.
will deliver to your door for free up to 1200 miles form sioux falls sd
$7500 or best offer
boys i have to get rid of this stuff bills are piling up and i cant work take a good look at it there is well over 7500 dollars worth of stuff and shipping alon would cost 1500 to ship it all
Please email me or pm me with question Millermanbg@aol.com
Cannondale
03 cannondale Speed titled
Ohlin shocks all the way around
Motor mount update
Oil line update
Tie rod end update
Bills pipe
Ac racing skid plate swing arm
Ac racing nerf bars pro peg head guard from black widow
New chain and sprockets
New swing arm, wheel and axle bearings.
Atk updated motor by TIE in Utah with about 30 hours on it
i got the motor in september and we get snow up here so i havent got more then one good ride on it other then breaking in the motor
Speed Moto map
Balanced clutch system
Balanced cranks
Z400 bearings
Everything loctited
New clutches
New valves and cams
New valve cover
extra parts
Two Cannondale Speeds missing motors, computers, rims, tires, and front shocks.
One frame title from nacs racing
other one dosnt have a title
Frame
2 02 frames
2 sub frames
2 engine cradles
1 02 steering stem
1 03 steering stem
Front Suspension
3 sets of stock a arms one new in bags
2 sets of spindles
2 sets of front hubs one red moto other is black
2 set of stock front speed brake rotors
2 complete front brakes systems
3 sets of tie rods with ends
2 extra front brake lines
1 stock steering stem bearing
1 after market steering stem bearing and holder
2 sets of front wheel bearings and seal
5 sets of brake pads
Rear Suspension
2 swing arms one new one old
2 rear ohlin shocks
2 complete rear brakes
2 stock rear speed rotor
1 stock bearing carrier with good bearings and seals
1 lonestar bearings carrier with good bearings and seals
1 stock axle
1 dura blue +2 +4 axle
2 set of rear hubs
6 rear sprocket hubs
2 axle nuts
3 sets of stock skid plate
1 set of new swing arm bearings and seals
4 new chain
20 new rear sprockets sizes form 36 o 42 tooth
4 new front sprockets sizes 13 to 14 tooth
Electrical
3 sets of head lights
3 wiring harnesses
1 starter
1 tail light
4 starter solenoids
Motor
2 throttle bodies with sensors
1 titanium stock moto full exhaust system
1 wiley company full system shortly exhaust
1 engine case with hydro clutch
1 side cover
4 full hydro clutch systems
5 set of injectors
2 fuel pumps
2 fuel regulators
2 sets of fuel hose
2 complete clutch fibers and steels
2 complete radiators with hoses
5 stock filter with cages
2 black widow air filter still in bags
Body
1 red front cannible
2 silver front fenders one moto graphics other custom moto graphics
1 custom painted race cut front
3 sets of side silver spares
1 set of black side spares
2 silver motor rears
1 custom painted dune cut rear to go with dune cut front
1 moto stock seat
1 stock moto number plate
2 sets of black head light covers
1 set of red head light covers
1 set of red head light delets
1 ac racing grab bar
1 ac racing 6 pack rack
2 stock grab bars
2 stock front bumpers
1 ac racing front non screened bumper
1 ac racing front screened bumper
2 computer trays
3 air box bottoms with sensors and stacks on has short stack
1 air box lid2 air filter holder
2 old style tanks with caps
3 battery trays with clamps
1 set of x5 bars with hand guards new grips
1 set of t2 with cyra hand guard and clamps new grips
bought out a dealer back in 03
have all the deal er books
mechanic guide
fuel injection book
mapping book
electrical book
parts book
update book
optinum book
2 stock owner manuals
ton of new and used part some stil in packages everhting i got for quads is yours.
will deliver to your door for free up to 1200 miles form sioux falls sd
$7500 or best offer
boys i have to get rid of this stuff bills are piling up and i cant work take a good look at it there is well over 7500 dollars worth of stuff and shipping alon would cost 1500 to ship it all
Please email me or pm me with question Millermanbg@aol.com
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
......
all i can say is WOW!!!...you're one lucky man....wouldnt mind that moto seat if you sell some stuff seperately...let me know.
Moto Plate?
Having learned my lesson previuously I have this question
"1 stock moto number plate" is this the front or back plate?
This is funny because thats how my previous purchase was listed and it was the rear plate. he he he
"1 stock moto number plate" is this the front or back plate?
This is funny because thats how my previous purchase was listed and it was the rear plate. he he he
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm