02 canibal-trade
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Looking to possibly trade my 02 cannondale canibal for a yami450/banshee/maybe raptor.
I picked this up as part of the sale of one of my trucks.Quad is very clean.Ran good when i got it but went through it with all new fuel lines,hoses etc.and fixed some minor problems from the previos owner(loose bolts,stuff not put back were they should of been)The guys on the forum helped me with the stuff and now it runs great,just takes a minute or two in the morning to start(which u guys tell me is normal)
02 canibal,full skids,full netted nerfs.According to previous owner(origianl owner)it is updated.As i can tell the electrical update has been done,aluminum water pump impellar has been done.Pipe isnt stock but just a universal one.
I will never ride the quad to its full potential,looking for a yami 450 /banshee or something along those lines.Thanks to all.
Contact info
blackgixxer@sbcglobal.net
bill stronkowsky
860-866-8469
I picked this up as part of the sale of one of my trucks.Quad is very clean.Ran good when i got it but went through it with all new fuel lines,hoses etc.and fixed some minor problems from the previos owner(loose bolts,stuff not put back were they should of been)The guys on the forum helped me with the stuff and now it runs great,just takes a minute or two in the morning to start(which u guys tell me is normal)
02 canibal,full skids,full netted nerfs.According to previous owner(origianl owner)it is updated.As i can tell the electrical update has been done,aluminum water pump impellar has been done.Pipe isnt stock but just a universal one.
I will never ride the quad to its full potential,looking for a yami 450 /banshee or something along those lines.Thanks to all.
Contact info
blackgixxer@sbcglobal.net
bill stronkowsky
860-866-8469
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Just FYI, a mate of mine has had lots of Banshee's and has never had any trouble (apart from a theft).
My son, Ben, has a YFZ and it has been a HEAP of trouble. Everything seems to be that little bit too light. Fine if you're racing a new one every year but as a keeper they're pretty pants IMHO..... Trying to get him into an updated 'Dale but unfortunately you're a bit far away from us here in the UK.....
My son, Ben, has a YFZ and it has been a HEAP of trouble. Everything seems to be that little bit too light. Fine if you're racing a new one every year but as a keeper they're pretty pants IMHO..... Trying to get him into an updated 'Dale but unfortunately you're a bit far away from us here in the UK.....
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Looking to sell this quad now,stuff has come up and could use the money more than the quad itself.Its all back to normal,starts right up now(bad coolant sensor).Same s picks up top except ith a sreet bike can on it,sounds good,no loss in power.Polished the nerfs,rims and sides of the frame.Looking for $3500(wht its worth to me).Located in connecticut,all info the same except new cell phone number..860-866-8722 thanks
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
i thought i did but here are a few of them.i used a midpipe off a gsxr 1000.pretty much any stock 4 bolt one will do.this is if u want to run a 4 bolt exhaust like the gixxers do.hack off the end plate and i welded a 60 degree angle 2'' tube to it,cleeaned it up and slipped it on.the pipes end tip is flush with the rear grab bar.i think it looks good.its quiet,still rumbles like a 4 stroke when u get on it and i didnt feel like i lost any power.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=110223069081
on ebay now.will also deal with the members of the board by knocking a little more off.thanks
on ebay now.will also deal with the members of the board by knocking a little more off.thanks