Price Reduced
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
$4500 O.B.O.
Up for sale is my pride and joy. I have spend over 15k and four years totally rebuilding and creating the ultimate American Made Sand Machine.
This quad has less than 10 hours of riding time on it since it's restoration was complete in Nov. 2007 I used Mobile 1 full synthetic to break in the motor and have had AmsOil in the motor and transmission ever since. This quad was only ridden in the sand dunes at Dumont Ca. over the Thanksgiving Holiday. It has never seen dirt or mud or even that thing called snow in its life. This quad is better than one you could buy brand new.
POWER PLANT-
495cc +60HP Timbo built motor. (everything new internally)
Timbo Stroker Crank
Billet Alum. Impeller
HD Fuel Injectors
Larger throttle body
Cyclone velocity stack intake
K~N Extreme air filter
Two Rare Earth magnets epoxied into the motor case
Rare Earth magnet in the oil drain plug
Rare Earth magnet in the transmission oil drain plug
CannonBoomer's scavenge oil in-line oil filter ( with sight glass, screen and magnet ) great added insurance.
Brake in oil was Mobile 1
Quad now has AmsOil in both the motor and transmission
COOLING SYSTEM-
Radiator (new)
Radiator hoses (new)
AmsOil Coolant in quad
EXHAUST SYSTEM-
Bill Ballance Pro Series (complete system)
Stainless Steel Head Pipe (moto style two individual pipes from the motor up to the point where it goes into the exhaust canister)
This system looks good, sounds good and for the short time I rode it performs really well.
FRAME, FRONT BUMBER, MOTOR CRADLE, SUB FRAME AND SWING ARM-
Everything highly polished by hand acheiving a mirror like finish
SUSPENSION-
Front-
Teixeira Tech +2.5" 1" Forward Long Travel a-arms (new)
TCS Long Travel shocks w/ remote res. (new)
Rear-
Stock swing arm (polished)
Ohlins shock w/ extra stiff spring (new)
BRAKES AND BRAKE LINES-
Galfer Wave rotors both front and rear (new)
Stainless Steel brake lines both front and rear (new)
CONTROLS-
ASV levers both clutch and front brake (unbreakable) new
Fast Flexx handle bars (new)
New thumb throttle and cable
New key switch and kill switch w/ teather included
Percision Steering Dampner
ELECTRICAL-
Blackwidow Electrical wire harness update (installed)
New battery
New voltage regulator
DRIVE-
Counter Sprocket included will be three new sprockets 13T, 14T and 15T
Rear Sprocket is a Sidewinder TiMoly/Titanium sprocket 38T (new)
Chain- Sidewinder Smart Chain "SR-51" w/ a 12,000lbs rating (new)
REAR END-
Lone Star Racing Axle +2 to -2 chromoly steel polished chrome
Lone Star Racing Anti-Fad nut (billet)
Lone Star Racing Sprocket hub (billet)
RAD Manufacturing triple row billet bearing carrier
Hardkore Racing hubs (billet)
Hardkore Racing wheel spacers (billet)
FRONT END-
Hardkore Racing hubs (billet)
Hardkore Racing wheel spacers (billet)
WHEELS AND TIRES-
Front-
Hiper Technology 4+1x10 single beadlock rims (new)
Kenda sand tires 23x7x10 (new)
Rear-
Hiper Technology 10x10 double beadlock rims (new)
Skat~Trak Rippers 8paddle 22x10x10 (kevlar re-enforced paddles) (new) $385 for the pair
PLASTICS-
Comes with Black (new) and Red. Both sets have been race cut and are in great shape.
Side Spars- Black Carbon Fiber (excellent condition like new)
Radiator Shrouds- Black Carbon Fiber (excellent condition like new)
Gas Tank Cover- Black Carbon Fiber (excellent condition like new)
POWDER COATING-
The new steering stem, new a-arms, spindles brake caliper parts and other misc. parts have all been powder coated to match, along with having a clear powder coat over the top of the color.
FASTNERS-
Every nut and bolt on this quad is Stainless Steel (except the motor)
Sadly I need to sell this beautiful quad to raise enough money for the down payment on a home in southern California. I have two Cannondale quads but this one must be sacrificed. My loss in your gain, this will make someone the envy of their friends.
My phone number is 559.301.1964
Photos to follow.
Up for sale is my pride and joy. I have spend over 15k and four years totally rebuilding and creating the ultimate American Made Sand Machine.
This quad has less than 10 hours of riding time on it since it's restoration was complete in Nov. 2007 I used Mobile 1 full synthetic to break in the motor and have had AmsOil in the motor and transmission ever since. This quad was only ridden in the sand dunes at Dumont Ca. over the Thanksgiving Holiday. It has never seen dirt or mud or even that thing called snow in its life. This quad is better than one you could buy brand new.
POWER PLANT-
495cc +60HP Timbo built motor. (everything new internally)
Timbo Stroker Crank
Billet Alum. Impeller
HD Fuel Injectors
Larger throttle body
Cyclone velocity stack intake
K~N Extreme air filter
Two Rare Earth magnets epoxied into the motor case
Rare Earth magnet in the oil drain plug
Rare Earth magnet in the transmission oil drain plug
CannonBoomer's scavenge oil in-line oil filter ( with sight glass, screen and magnet ) great added insurance.
Brake in oil was Mobile 1
Quad now has AmsOil in both the motor and transmission
COOLING SYSTEM-
Radiator (new)
Radiator hoses (new)
AmsOil Coolant in quad
EXHAUST SYSTEM-
Bill Ballance Pro Series (complete system)
Stainless Steel Head Pipe (moto style two individual pipes from the motor up to the point where it goes into the exhaust canister)
This system looks good, sounds good and for the short time I rode it performs really well.
FRAME, FRONT BUMBER, MOTOR CRADLE, SUB FRAME AND SWING ARM-
Everything highly polished by hand acheiving a mirror like finish
SUSPENSION-
Front-
Teixeira Tech +2.5" 1" Forward Long Travel a-arms (new)
TCS Long Travel shocks w/ remote res. (new)
Rear-
Stock swing arm (polished)
Ohlins shock w/ extra stiff spring (new)
BRAKES AND BRAKE LINES-
Galfer Wave rotors both front and rear (new)
Stainless Steel brake lines both front and rear (new)
CONTROLS-
ASV levers both clutch and front brake (unbreakable) new
Fast Flexx handle bars (new)
New thumb throttle and cable
New key switch and kill switch w/ teather included
Percision Steering Dampner
ELECTRICAL-
Blackwidow Electrical wire harness update (installed)
New battery
New voltage regulator
DRIVE-
Counter Sprocket included will be three new sprockets 13T, 14T and 15T
Rear Sprocket is a Sidewinder TiMoly/Titanium sprocket 38T (new)
Chain- Sidewinder Smart Chain "SR-51" w/ a 12,000lbs rating (new)
REAR END-
Lone Star Racing Axle +2 to -2 chromoly steel polished chrome
Lone Star Racing Anti-Fad nut (billet)
Lone Star Racing Sprocket hub (billet)
RAD Manufacturing triple row billet bearing carrier
Hardkore Racing hubs (billet)
Hardkore Racing wheel spacers (billet)
FRONT END-
Hardkore Racing hubs (billet)
Hardkore Racing wheel spacers (billet)
WHEELS AND TIRES-
Front-
Hiper Technology 4+1x10 single beadlock rims (new)
Kenda sand tires 23x7x10 (new)
Rear-
Hiper Technology 10x10 double beadlock rims (new)
Skat~Trak Rippers 8paddle 22x10x10 (kevlar re-enforced paddles) (new) $385 for the pair
PLASTICS-
Comes with Black (new) and Red. Both sets have been race cut and are in great shape.
Side Spars- Black Carbon Fiber (excellent condition like new)
Radiator Shrouds- Black Carbon Fiber (excellent condition like new)
Gas Tank Cover- Black Carbon Fiber (excellent condition like new)
POWDER COATING-
The new steering stem, new a-arms, spindles brake caliper parts and other misc. parts have all been powder coated to match, along with having a clear powder coat over the top of the color.
FASTNERS-
Every nut and bolt on this quad is Stainless Steel (except the motor)
Sadly I need to sell this beautiful quad to raise enough money for the down payment on a home in southern California. I have two Cannondale quads but this one must be sacrificed. My loss in your gain, this will make someone the envy of their friends.
My phone number is 559.301.1964
Photos to follow.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (kenny mariscott @ May 27 2008, 07:30 AM) <{POST_SNAPBACK}>
NEW PRICE AT $5000 THIS IS A GREAT DEAL.
Man, that is one nice looking dale, good luck.
QUOTE (o3speed @ Jun 3 2008, 04:48 PM) <{POST_SNAPBACK}>
i'm very interested, but i'm trying to get the funds around....
how many hours does it have on the engine?
how many hours does it have on the engine?
oh, nevermind, i didn't read the description close enough to see it only had 10 hours on it.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (o3speed @ Jun 3 2008, 01:48 PM) <{POST_SNAPBACK}>
i'm very interested, but i'm trying to get the funds around....
how many hours does it have on the engine?
how many hours does it have on the engine?
Well let me know how much you've got and maybe we can work something out. I need to sell it really BAD!!!