new parts and part outs

Message
Author
peterock
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#11 Post by peterock »

If the float shocks are the yellow spring ones in the picture....I'm no longer interested.

jesshamner
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#12 Post by jesshamner »

The shocks with the yellow springs in the picture are Ohlins.

quadryder
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#13 Post by quadryder »

front view of the GUY310 quad that being parted... WITH the Fox Shocks.

desertbound
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#14 Post by desertbound »

Those are regular floats, and would be a great addition for you drag guys. I think the shocks only weigh about 1 lb a piece. And perform up to par with a stock yfz or 450r shock. Good deal on the pricing too. The LSC or DSC refered to an fox evol shock. The lsc are the single compression adjust and the dsc are the hi/low compression adjust are the DSC. Fox only makes DSC evols now. I had dsc's on my yfz and they were amazing. You can add clicker bottles to get compresion adjust on those shocks for about $200 a piece. No rebound though. Again, great shocks.

wistech
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#15 Post by wistech »

Just to be clear I did not build that engine. I helped diagnose why it didnt pump oil out of the scavange pump (drive pin was missing) Not saying its a good or bad motor but thats all I had to do with it and never heard from guy after that.

quadryder
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#16 Post by quadryder »

Thats correct Wistech, I know how untrusting people can be with a new member trying to sell items on here. With you atleast knowing the motor people cant say I am making it up. The pump was fixed however. All the details of the motor are on the link I have posted.

wistech
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#17 Post by wistech »

It is a true 448 Timbo cranked stroker . Guy assembled it himself.

quadracer500
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#18 Post by quadracer500 »

how much for the ohiln front shocks?

quadryder
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#19 Post by quadryder »

$100 for both shipped, 1/4inch of the spacer has been ground off to test fit my Vforce so you will need to put a washer on it

quadracer500
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#20 Post by quadracer500 »

paypal account ?

Post Reply