Built Race CDale: Part It?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Please post your name, phone number, and location as per forum rules.
Also, your below comments don't exactly make sense. You said you basically did inspection and timing check but in order for you to see the valves, piston, and the side/bottom of the piston that would mean you had it apart down to the crank. From that I can only make out that you built the motor which won't start. Is that the case?
Also, your below comments don't exactly make sense. You said you basically did inspection and timing check but in order for you to see the valves, piston, and the side/bottom of the piston that would mean you had it apart down to the crank. From that I can only make out that you built the motor which won't start. Is that the case?
QUOTE (who_gives_a6 @ Jun 6 2010, 01:01 PM) <{POST_SNAPBACK}>
When I bought it the engine was out. I took the sidecover off and basically did inspection and timing check per some of the guys at C'Daler. Piston looked brand new and obiously never used. Valves had no carbon, and you could see obvious cleanup work on the head.
QUOTE (who_gives_a6 @ Jun 6 2010, 01:01 PM) <{POST_SNAPBACK}>
Was told a CP piston and cylinder kit was in it. I did notice the bottom/sides of piston had a nice black coating on it from manufacturing, if that means anything.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm