Diamond Racing A-arms & Shocks

Message

MotoX_Racer07 · #1 Post by **MotoX_Racer07** » Wed Oct 15, 2003 11:19 pm

I am selling a complete long travel front end on ebay, Check it out ... http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2437824636

MotoX_Racer07 · #2 Post by **MotoX_Racer07** » Thu Oct 16, 2003 4:34 pm

I am open to offers also ... nothing rediculous though ...

Cannondale12 · #3 Post by **Cannondale12** » Mon Oct 20, 2003 11:37 pm

I got the diamond racing +3 a-arms for my cannondale and my brake calipers hit the a-arms when turning.. Will diamond racing fix those for free or do i got to pay..
thanks man

MotoX_Racer07 · #4 Post by **MotoX_Racer07** » Tue Oct 21, 2003 12:51 am

Does your atv have the 03 steering stem or an aftermarket? (this is for the tie rods hitting on the frame when moving through the travel) Do your lower a-arms have the pressed in ball joint (circular) or the one that is threaded with a nut? This will determine if you have the old or new. The old ones had the pressed ball joint. The new ones have the threaded ball joint. Mine were replaced, I know Jim real well and I am sure he will make it right for you.

Cannondale12 · #5 Post by **Cannondale12** » Tue Oct 21, 2003 8:45 pm

I have Jims aftermarket stem. My balljoints are threaded with a nut too. The reason why i didnt try to find out earlier didn't want to send back and have to wait it was in the middle of season...
thanks man do u have jims number

MotoX_Racer07 · #6 Post by **MotoX_Racer07** » Tue Oct 21, 2003 9:55 pm

You have the newer design then, All you need to do is shave the nipple down on your caliper and you will be fine. try that ... Go to www.diamondracingatv.com his number is there. If they are still wrong though they should be fixed ... give him a call and find out ... I havn't even tried the new ones yet to know for sure or not

Big Winky · #7 Post by **Big Winky** » Thu Oct 23, 2003 12:34 pm

Yes, by all means call me! The old design (using the stock ball joint just touches the caliper), and we know about it, thus we'll take care of it for you. PS, call me directly, 8-5, m-f. although if you trim the post on the caliper, they'll clear also.

MotoX_Racer07 · #8 Post by **MotoX_Racer07** » Thu Oct 23, 2003 10:58 pm

If anyone is interested in these A-arms & Shocks the price is reduced .... $925 Shipped to your door! .... PM me if interested. Remember these a-arms go for $725 new and plus the shocks another 550 to 600 ... I have 1325 into this front end.

MotoX_Racer07 · #9 Post by **MotoX_Racer07** » Wed Oct 29, 2003 12:10 am

I am willing to separate the shocks and a-arms also. $520 for the shocks, Under 5 hours usage, one weekend riding. A-arms I will do for $575 shipped, 5 hours usage also .. not even used for MX ... pM if interested.

MotoX_Racer07 · #10 Post by **MotoX_Racer07** » Wed Oct 29, 2003 2:12 am

SOLD!!!!!!!!

Cannondaleriders

Diamond Racing A-arms & Shocks

Diamond Racing A-arms & Shocks

A-arm set

hey

Few questions first

hey

Your cool then

Reduced!!

Will separate

SOLD