Fresh Rebuilt Motor
For Sale I have a fresh rebuilt Cannondale motor with all of the factory goodies.
[attachment=12527:101_0682.jpg] [attachment=12528:101_0683.jpg] [attachment=12529:101_0686.jpg] [attachment=12530:101_0687.jpg]
Unicorn case
FX400 Cams
FX400 Valve buckets
Billet rod Crank with updated Z400 Rod Bearing
Improved Cartridge Plate Bolts
New Factory 95mm Piston Kit & Sleeve
New One Way Bearing
Updated Clutch to the thicker Clutch Plates
Fresh Valve Job from Timbo
Rebuilt Decomp Mechanism
New Aluminum Valve Cover
Billet Water Pump Impeller
Billet Magnetic Oil Drain Plug
Updated Cam Timing Specs
Powdercoated Covers in Black and Silver
Billet Oil Filter Cover
New Stainless Steel Fasteners
Updated Transmission Drain Plug (w/bevel)
Many more new parts.......
$2000 outright (plus shipping)or will consider credit for complete motor cores and or interesting trades.
Ken Deal
305-nine eight nine, 56 ate one
[attachment=12527:101_0682.jpg] [attachment=12528:101_0683.jpg] [attachment=12529:101_0686.jpg] [attachment=12530:101_0687.jpg]
Unicorn case
FX400 Cams
FX400 Valve buckets
Billet rod Crank with updated Z400 Rod Bearing
Improved Cartridge Plate Bolts
New Factory 95mm Piston Kit & Sleeve
New One Way Bearing
Updated Clutch to the thicker Clutch Plates
Fresh Valve Job from Timbo
Rebuilt Decomp Mechanism
New Aluminum Valve Cover
Billet Water Pump Impeller
Billet Magnetic Oil Drain Plug
Updated Cam Timing Specs
Powdercoated Covers in Black and Silver
Billet Oil Filter Cover
New Stainless Steel Fasteners
Updated Transmission Drain Plug (w/bevel)
Many more new parts.......
$2000 outright (plus shipping)or will consider credit for complete motor cores and or interesting trades.
Ken Deal
305-nine eight nine, 56 ate one
The engine core credit is going to vary drastically depending on the usable parts. That means if you blew a crank, dropped a valve or have a cracked case the price is going to be less. A blown or bad crank is usually a given, the others cost more to fix or are non-usable components when rebuilding the motor. If you need direct quotes call me.
Ken
Ken
No, I thought about it, and I could make that an option if someone wanted. THis was actually a motor of all the good stuff sitting here in the shop for several years that wasn't picked up. I have some people interested, but if it doesn't sell, it's going to be ported and put into a quad. I just picked up two rollers last week. ![tongue.gif](style_emoticons/<#EMO_DIR#>/tongue.gif)
![tongue.gif](style_emoticons/<#EMO_DIR#>/tongue.gif)