Cannondaleriders

For Sale( or trade for a Ford Lighting truck)


WILL HAVE PICS UP IN A FEW DAYS!!SORRY!!


2003 Cannondale that started off as a Cannibal.

450cc motor built by Haydug cycles:
-New valves
-New springs
-New aluminum coolant impeller
-New clutch plates
-New z400 bearing crank
-New WWE 450cc piston and rings
-New Interstate battery
-New stock airfilter
-Nacs motocross map
I ALWAYS use Redline synthetic 10w40 in the motor and Redline superlightweight 85w in the tranny
Never had any other coolant in it other then Engine Ice

Other motor updates:
-Aluminum valve cover(won't corrode like other magnesium ones)
-Motor mount(puts less stress on motor mounts)
-Oil line
-solid swingarm bolt
-Inline 20 fin cooler
-Engine cradle has been reinforced to reduce stress


Chassis components:
-Walsh Long Travel a-arms and tie-rods(powdercoated metallic blue)
-Walsh 250r conversion kit(subframe-metallic blue aluminum gastank-wrinkle black)
-Elka piggyback Long travel front shocks(compression adjustable- less then 5 hours on service)
-Ohlins rear shock with a Elka(ssd spring, Hyperco main spring, valving, and bumper)
-RPM Dominator plus 4 axle and a new locknut
-TC pipe(modded to fit the 250r kit)
-Diamond Racing stem bearing(uses a 400ex stem bearing)
-Denton rebuilable steering stabilizer
-Aluminum skid plate


Body:
-White maier 250r plastics(rears have cracks and have been cut, fronts have a like new glossy black maier hood)
-Quadtech seat cover and foam(made by Jetrim but they are exactly the same looking-1986 style seat pan)
-RTC rear seat latch
-Duncan front bumper(powdercoated wrinkle black)
-OMF radiator shrouds and louver(powdercoated wrinkle black)
-Like new AC propeg nerf bars
-88-89 250r grab bar
-450r front and rear seat grommets


Controls:
-New Protaper Contour Carmichael bend handlebars
-New Renthal half waffle grips
-Cycra black stealth hand guards
-Magura hydro clutch
-RTC brake lever
-450r front brake mastercylinder
-z400 thumb throttle
-Pingle kill switch


Drivetrain/braking:
-Front and rear Galfer wave rotors
-Front and rear Galfer steel braided brake lines
-Newer brake pads
-New Sunstar 39 tooth rear sprocket
-New D.I.D non o-ring gold chain
-14 tooth front sprocket


Rims/tires:
-Hiper 10inch front rims with single beadlocks
-Hiper 8ich rear rims with intergrated hubs
-Like new 20inch front MXR4 ITP Holeshots
-Like new 18inch rear MXR4 ITP Holeshots


Items powdercoated metallic blue:
-A-arms, swingarm, steering stem, foot brake lever, shifter, throttle cover, brake mastercylinder cover, magura hydro clutch cover, key switch/kill switch plate, oil filter cover, starter clutch cover, battery strap, case saver, front spindles and hubs


Items powdercoated wrinkle black:
-Walsh aluminum gas tank, Walsh subframe, Duncan front bumper, OMF radiator shrouds/louver, and clutch cover




The bike has less then 20 hours tops on it after being completely rebuilt. The shocks are set-up for a 145lb to 165lb riders. The quad is located in Middletown Delaware 19709 so test rides are fine for buyers who live close. If you have any questions send me a pm or email me at Greencash02@aol.com

I can be reached on my cell at 302-740-5056
Thanks, Nick.

Here is a pic from when I FIRST built it. Needless to say I have added many parts since then. I will have to get some up-to-date pics once the snow melts a little. Thanks, Nick.

WOW, I have no idea what I'm doing. Could someone post pics for me? Thanks, Nick.

hey nick, email me the pic's. I'll repost them for you.

what gen lightning are you looking for?

Gen1 or Gen2.....It doesn't really matter. Whatcha got?

Nick here are your pictures!

another

Last one, if you take anymore let me know

Just to let you guys know, I have changed many things since those pics were taken. For example:

Duncan bumper
ac nerfs
new tc pipe
new style walsh gas tank and subframe
new ITP SX tires
handlebars
cycra hand guards
and the list goes on........