Posted: Tue Apr 10, 2007 3:06 am
Features
Maximum performance ported head same as all my race heads
New original FX400 swirl polished valves (not the later Kibblewhites)
New cam buckets
Titanium spring retainers (not the aluminum )
New Fx400 intake cam reheat treated then melanited (titanium nitride coating)
New 02 exhaust cam reheat treated then melanited
Stock valve springs shimmed to 40 pounds
Rebuilt decompresion mechanism
Bored mc1000 throttle body to match intake (sleeve is still in TB but bore matched )
Bored bike velocity stack to match intake
Solid copper exhaust washers port matched to head
The head was checked for clearances of cam buckets and cam bearings. Oil lube holes opened up. The chamber is ported for a stock sleeve but will match to your bore size if needed. Exhaust ports are polished.This head can use stock or Harley injectors. The velocity stack will work just like a stocker but a cyclone with UNI pod filter is available for extra $. I can shim the valves for long check intervals or tighter for max power. Your choice.
The head with valves ,springs,TB,and velocity stack is $770
Assembled with the buckets and cams $1180
There will be a substantial discount if you have good usable exchange parts but I will have to discuss that on an individual basis.
If you have any questions just ask.
I can install on your engine time the cams ,and dyno tune as well.
This head will be for sale for about 2 to 3 weeks and then it is going in a 460 engine which will be for sale as well or a 505 which I will keep.
John Laska
Wausau WI
1 715 551 1498
Maximum performance ported head same as all my race heads
New original FX400 swirl polished valves (not the later Kibblewhites)
New cam buckets
Titanium spring retainers (not the aluminum )
New Fx400 intake cam reheat treated then melanited (titanium nitride coating)
New 02 exhaust cam reheat treated then melanited
Stock valve springs shimmed to 40 pounds
Rebuilt decompresion mechanism
Bored mc1000 throttle body to match intake (sleeve is still in TB but bore matched )
Bored bike velocity stack to match intake
Solid copper exhaust washers port matched to head
The head was checked for clearances of cam buckets and cam bearings. Oil lube holes opened up. The chamber is ported for a stock sleeve but will match to your bore size if needed. Exhaust ports are polished.This head can use stock or Harley injectors. The velocity stack will work just like a stocker but a cyclone with UNI pod filter is available for extra $. I can shim the valves for long check intervals or tighter for max power. Your choice.
The head with valves ,springs,TB,and velocity stack is $770
Assembled with the buckets and cams $1180
There will be a substantial discount if you have good usable exchange parts but I will have to discuss that on an individual basis.
If you have any questions just ask.
I can install on your engine time the cams ,and dyno tune as well.
This head will be for sale for about 2 to 3 weeks and then it is going in a 460 engine which will be for sale as well or a 505 which I will keep.
John Laska
Wausau WI
1 715 551 1498