2002 Cannondale Cannibal

Post Reply
Message
Author
cdalemx301
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#1 Post by cdalemx301 »

E-Mail - Cdalemx301@aol.com
Cell- 617-548-9843 (Mike) Make sure to leave a message I miss a lot of calls

I am relisting this because I had it up about a month ago but the weather didn't cooperate with me to get it cleaned up and everything so I never let anyone see it haha....

Alright it has come to that time where I am more in the need for money then for the Cannondale. I crashed in May of last year and have only rode it 4 times since then. In April of 2006 I installed a new piston and sleeve, new timing chain, and new clutch plates and springs. Never had any mechanical problems with the bike if I remember correctly it was dynoed on 10/11/2001. Single owner, clear title

ATV has had the oil changed with Spectro oil every three rides. Valve clearance was checked when piston/sleeve were installed and was within spec. Crank Plate and Tranny studs were checked and not loose. Motor is early type with cable clutch. Quad includes D&M Kit for laptop and IPaq and also many stock parts.

Chassis Component upgrades include:
+2 LSR Std travel front end w/ Comp adjust Elkas valved for 165 pound B Class MX

LSR Std length Steering stem (2 rides bought in Aug. 06)

LSR Adj. Axle

Denton Rebuildable Steering Dampner

Tag T-2 CR Double Hi handlebars

Graydon Proline Std Nerf Bars

Blingstar Bumper

OMF Rad. Shrouds

Kenda Klaws mounted on .190 ITP Baja Wheels w/ reinforced rings

Engine Components:
Aluminum Impellar

Magnesium Valve Cover replaced Fall of '05

New Timing Chain 4/2006

New Piston/Sleeve combo 4/2006

Clutch replaced 4/2006

HMF exhaust

ATV is in excellent mechanical condition starts everytime and runs fine, Visually Quad is very clean blingstar bumper is slightly bent and handlebars have a very slight but very rideable bend on the right side. New Tie-rods, steering stem and brake lever were replaced after crash. Plastic has a few scuffs but nothing unexpected for an 02 bike.

Extra parts inc. front plastics, stock exhaust, aarms, studded tires with two rides on them, majority of gaskets for the engine, Engine manual.

I am hoping to get $3500 out of it but make reasonable offers and I will consider them.

E-mail me at cdalemx301@aol.com
If anyone wants to see the fullsize images email me and i can send them to you.



[img]http://farm1.static.flickr.com/229/470424617_d1b40aa917_m.jpg[/img]

cdalemx301
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#2 Post by cdalemx301 »

NEW PRICE 3200 OBO I need to sell

cannondale27
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#3 Post by cannondale27 »

Where are you located?

cdalemx301
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#4 Post by cdalemx301 »

Central Massachusetts about 10 minutes outside of Worcester

cdalemx301
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#5 Post by cdalemx301 »

Okay guys is noone interested or is my price to high? Make me offers this thing needs to go

2000ex
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#6 Post by 2000ex »

I hope this one is not going to end in my garage if the price keeps dropping smile.gif

cdalemx301
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#7 Post by cdalemx301 »

haha thats all you need...we can just put them in hibernation in there because we all know you dont have time to ride 4 of them hahaha

Post Reply