Page 1 of 2
Posted: Thu May 17, 2007 6:28 pm
by haydug
I have a CR 500 complete engine, wiring, carb. for your cannondale chassis. $650 + shipping. If you want a fast 2-stroke quad, this is your conversion!
Posted: Fri May 18, 2007 1:56 am
by speedracer
I have a CR 500 complete engine, wiring, carb. for your cannondale chassis. $650 + shipping. If you want a fast 2-stroke quad, this is your conversion!
What year? Also how does it run?I need a new project.
Posted: Fri May 18, 2007 2:03 am
by haydug
1991 engine. The motor was completetly gone through a couple of years ago. My guess is it would need rebuilt, if anything for a peice of mind. One nice thing, you can put all new bearings and topend for around $200 at the most. I thought about doing it, but I have to many projects now. I can also include the airbox, so you have the intake boot. My plans were to run the walsh subframe with R style tank, and use as short of an intake as possible. It could be done pretty easil, and would be pretty neat for sure.
Posted: Fri Jun 01, 2007 5:13 pm
by Fash00
Still got this thinking of selling my ported 450 timbo stroker and dropping this in? Ever done one? Aftermarket pipe clear frame?
Posted: Fri Jun 01, 2007 5:47 pm
by thedeatons
Can I ask you guys why you are going to give up a perfectly good Timbo engine for a two stroke Honda? Just curious, I don't mean to interfere with the sale....
Posted: Fri Jun 01, 2007 6:46 pm
by mxracer776
me to?
Posted: Fri Jun 01, 2007 7:39 pm
by Fash00
Because its not perfectly running
Posted: Fri Jun 01, 2007 9:42 pm
by haydug
Still got it yes. I'll trade you engines straight up. Then sell your wiring and ecu & pipe. If you do a search on cannodaler, you'll find a cr250 converion dale that looks good. If you take the time to do it right, it would be a killer quad. Light and very fast!
Posted: Fri Jun 01, 2007 9:45 pm
by Fash00
Tried to pm ya but your inbox is full so
Tempting Ill have to think about it so youd trade me the cr500 motor and harness and all that for just my motor? I just got good bit tied up in my motor but dont ahve patience or $$$ to finish it.Psychosis old motor with brand new ASSO pistons,timbo stroker crank,timbo ported head and tb,new timing chain,i dont even remember what else but flywheel is spun and needs a new fuel pump i havent even got to ride this **** thing yet but me and NRATH got it to fire up and heard it run for like 1 minute
Posted: Sat Jun 02, 2007 12:10 am
by cannondale27
Not to disuade you from CR500 but man Fash you are two hours away from having a perfect Timbo motor.You have a leaky sidecover, waterpump seal,fuelpump and flywheel.That is alot easier to fix than swapping motors.If you really want to ride just get it done.