Posted: Sun Feb 24, 2008 4:58 pm
Roller 2003 Cannibal. Registered and Green Sticker for the Republic of California.
I purchased the quad just over a year ago from another board member, I have not touched since then. I picked up a Moto last month and don't need the Cannibal anymore. I want to be as truthful and up front with the condition, please ask any questions and I will guarantee that I will provide an honest description.
The Bad:
No motor, clutch slave cylinder, no fuel pump, no rear sprocket or wiring harness. The engine cradle has been repaired once near the front motor mount, it has cracked through the weld, it should be gusseted. One of the rear wheels is a little banged up, not bad. The front wheels are aluminum but not polished.
The Good:
Low hour quad, it is not all banged up! The member that I purchased it from took out a good running motor so the frame should not be full of metal. The rear plastic and seat are real good condition. The front plastics are nice but have been race cut. It does have an air box with the short bike air horn and battery tray.
The original Ohlins are on the front and the rear shock is the factory Fox Podium.
I don't want to part it out (yet). I live in Torrance and will be going to Vegas at the end of next month, I would be willing to drop it off on the way for no additional cost. I have collected a few of the missing parts that I may sell for additional $. I have not cherry picked parts off of this, it is the condition of how I received it.
How about $650?
PM me here with any questions. Pictures at http://forums.cannondaler.com/viewtopic.php?t=12387
Allen Newton
310- 532-1331
badaz37@earthlink.net
I purchased the quad just over a year ago from another board member, I have not touched since then. I picked up a Moto last month and don't need the Cannibal anymore. I want to be as truthful and up front with the condition, please ask any questions and I will guarantee that I will provide an honest description.
The Bad:
No motor, clutch slave cylinder, no fuel pump, no rear sprocket or wiring harness. The engine cradle has been repaired once near the front motor mount, it has cracked through the weld, it should be gusseted. One of the rear wheels is a little banged up, not bad. The front wheels are aluminum but not polished.
The Good:
Low hour quad, it is not all banged up! The member that I purchased it from took out a good running motor so the frame should not be full of metal. The rear plastic and seat are real good condition. The front plastics are nice but have been race cut. It does have an air box with the short bike air horn and battery tray.
The original Ohlins are on the front and the rear shock is the factory Fox Podium.
I don't want to part it out (yet). I live in Torrance and will be going to Vegas at the end of next month, I would be willing to drop it off on the way for no additional cost. I have collected a few of the missing parts that I may sell for additional $. I have not cherry picked parts off of this, it is the condition of how I received it.
How about $650?
PM me here with any questions. Pictures at http://forums.cannondaler.com/viewtopic.php?t=12387
Allen Newton
310- 532-1331
badaz37@earthlink.net
