Posted: Mon Mar 10, 2008 3:25 pm
Ok guys, I putting up all of my Cannondale stuff for sale and would like to sell it as a package deal if possible just to make things easier. I want $5000.00 for everything Cannondale that I have. That includes every part that I have listed in my "Cleaning out my shop" post in this section plus other misc. parts not on that list.
Here is a link to that post .... http://www.cannondaleriders.com/forums/ind...showtopic=20606
I also have two complete Cannondale quads to go along with all of the parts.
Fx400
450 stroker motor with ported head
Moto a-arms
Ohlins Moto shocks (front & rear) that have all been serviced by Pro-Pilot Suspension
Steel front brake lines
LSR steering stem and anti-vibe clamp and CR250 bend Renthal handlebars
Ohlins Steering Dampner
HMF exhaust
ITP T-9 Baja Wheels
Red Plastic (not cut or wrecked)
Durablue +2+4 axle
AC Front and Rear Bumpers
AC Nerf Bars
The front a-arms need to be rebuilt, but the quad comes with all new bearings, seals, clips, and ball joints to do the job. This quad will fly and handles great.
2003 Blaze
This quad has all of the blaze goodies except I sold the Ohins steering dampner off of it.
HMF Exhaust with quiet core.
Steel braided brake lines
Tag Handle Bars
Ohlins shocks that have all been serviced by Pro-Pilot Suspension
It has the dark gray FX400 plastis on it with a Quad Tech
AC nerf bars
It has silver ITP wheels on it, but I still have the rear black beadlock wheels (one is slightly bent).
The motor was just rebuilt last summer and only has about 5-6 hrs on it since then. The water pump seals didn't seal and need to be replaced but I haven't had time to do it. It has a balanced Z400 updated crank, stock piston, and lightly ported head.
I have stock front Blaze Plastic and I have the rear but they have been cut.
I also have black rear plastic and the black front that has been cut to accept a Quadtech Hood.
I have silver front Plastic that is race cut.
I have a good rear red fender.
I have a cut front red fender.
I also have another motor (torn down). The head and cams are good and so is the transmission.
With all of the other parts that I have in my other For Sale ad, you could almost build a whole other quad.
You can email me at jwheat3@aol.com or jwheat3@bellsouth.net. You can also call me on my cell at 601-209-3139 or at my shop at 601-992-3005.
Thanks for looking,
Jimbo
Here is a link to that post .... http://www.cannondaleriders.com/forums/ind...showtopic=20606
I also have two complete Cannondale quads to go along with all of the parts.
Fx400
450 stroker motor with ported head
Moto a-arms
Ohlins Moto shocks (front & rear) that have all been serviced by Pro-Pilot Suspension
Steel front brake lines
LSR steering stem and anti-vibe clamp and CR250 bend Renthal handlebars
Ohlins Steering Dampner
HMF exhaust
ITP T-9 Baja Wheels
Red Plastic (not cut or wrecked)
Durablue +2+4 axle
AC Front and Rear Bumpers
AC Nerf Bars
The front a-arms need to be rebuilt, but the quad comes with all new bearings, seals, clips, and ball joints to do the job. This quad will fly and handles great.
2003 Blaze
This quad has all of the blaze goodies except I sold the Ohins steering dampner off of it.
HMF Exhaust with quiet core.
Steel braided brake lines
Tag Handle Bars
Ohlins shocks that have all been serviced by Pro-Pilot Suspension
It has the dark gray FX400 plastis on it with a Quad Tech
AC nerf bars
It has silver ITP wheels on it, but I still have the rear black beadlock wheels (one is slightly bent).
The motor was just rebuilt last summer and only has about 5-6 hrs on it since then. The water pump seals didn't seal and need to be replaced but I haven't had time to do it. It has a balanced Z400 updated crank, stock piston, and lightly ported head.
I have stock front Blaze Plastic and I have the rear but they have been cut.
I also have black rear plastic and the black front that has been cut to accept a Quadtech Hood.
I have silver front Plastic that is race cut.
I have a good rear red fender.
I have a cut front red fender.
I also have another motor (torn down). The head and cams are good and so is the transmission.
With all of the other parts that I have in my other For Sale ad, you could almost build a whole other quad.
You can email me at jwheat3@aol.com or jwheat3@bellsouth.net. You can also call me on my cell at 601-209-3139 or at my shop at 601-992-3005.
Thanks for looking,
Jimbo