Posted: Sun Nov 08, 2009 11:18 pm
I wish I knew more about these arms but I really just don't know much at all. I bought them site unseen and had hopes of using them. But, they are just taking up too much room.
Prices below do not include shipping.
The first pic is a almost ready to go set and they should fit a cannondale with the heims lining up exact spacing for the dale. They are fully adjustable due to the heims so thats a big plus. They need the bolt spacers which ASR sells along with 4 more frame side heims. The ball joints are all ASR big joints. They do not have the shims needed to mount to the cannondale spindle so you will need that as well. The uppers are a wrinkle powder and the lowers are raw needing cross supports and shock mounts welded on. The welds look great on these so who ever did them was a professional. I am thinking these were a prototype of some sort or a shop was just getting rid of their spares. They actually look very much like a set of ASR arms, I wonder if they are actually theirs. Just to be clear, they appear to fit a dale no problem, they need some parts, and they need the shock mounts as well. The shock mounts really are not a problem to get made and installed.
$100 for the set including ball joints and pins
[attachment=9296:DCAM0071.JPG]
These are for a quadzilla. The ball joints I have will fit.
[attachment=9298:DCAM0073.JPG]
And for the best of the bunch. A who gaggle of ball joints. I used these exact joints when I had my arms modified. These are the beefiest joints i have ever seen. Like I said before, they are $30+ each. I'll sell em for $15 each including the pin. You will need to get the shims though which is only a few bucks.
[attachment=9300:DCAM0075.JPG]
Prices below do not include shipping.
The first pic is a almost ready to go set and they should fit a cannondale with the heims lining up exact spacing for the dale. They are fully adjustable due to the heims so thats a big plus. They need the bolt spacers which ASR sells along with 4 more frame side heims. The ball joints are all ASR big joints. They do not have the shims needed to mount to the cannondale spindle so you will need that as well. The uppers are a wrinkle powder and the lowers are raw needing cross supports and shock mounts welded on. The welds look great on these so who ever did them was a professional. I am thinking these were a prototype of some sort or a shop was just getting rid of their spares. They actually look very much like a set of ASR arms, I wonder if they are actually theirs. Just to be clear, they appear to fit a dale no problem, they need some parts, and they need the shock mounts as well. The shock mounts really are not a problem to get made and installed.
$100 for the set including ball joints and pins
[attachment=9296:DCAM0071.JPG]
These are for a quadzilla. The ball joints I have will fit.
[attachment=9298:DCAM0073.JPG]
And for the best of the bunch. A who gaggle of ball joints. I used these exact joints when I had my arms modified. These are the beefiest joints i have ever seen. Like I said before, they are $30+ each. I'll sell em for $15 each including the pin. You will need to get the shims though which is only a few bucks.
[attachment=9300:DCAM0075.JPG]