Pair of FX400's anyone

Message

01FX400 · #1 Post by **01FX400** » Wed Feb 16, 2011 4:11 am

I am looking to find a good home for my two fx 400's. They have been spending excesive amounts of time in storage, and as I am physically unable to ride them anymore, they are in need of being riden. One is all stock, except it has red cannibal fenders on it. The other had an all new motor installed in 2003, with the upgraded mc1000. Has less than 10 hrs on motor since rebuild. It has the original charcoal fenders the extras are as follows: black adonized ITP beadlock wheels, oem nerf bars, oem twist throttle, dura blue wheel spacers, full skid plates, and a big gun slip on. I also have lots of parts to go with them. Here are just a few of them: swingarm (NIB), moto 440 oem seat (NIB), oem charcoal front and rear fenders (NIB), complete set of all original decals, tie rods and ball joints (NIB), chain sliders and roller, bumpers, and lots, lots more. Not to mention all the original motor parts from the upgade. I have the original owners manual for one of them and I have copies of all the original parts diagrams and part numbers right from cannondale. If anyone is interested please let me know. Thanks for looking.

who_gives_a6 · #2 Post by **who_gives_a6** » Wed Feb 16, 2011 6:01 am

Price, pics, and location helps.

01FX400 · #3 Post by **01FX400** » Thu Feb 17, 2011 3:13 am

QUOTE (who_gives_a6 @ Feb 16 2011, 06:01 AM) <{POST_SNAPBACK}>

Price, pics, and location helps.

Sorry about that. I'm in Pottstown, Pennsylvania. I'm asking $7400 for everything. They both started right up last spring, but have sat since. I was going through all the extra parts today, and there is even more there than I remember. Most parts are OEM, and in original packaging. Rear mud flaps, tail light, foot pegs, swingarm bearings, shock bearings, filters, a-arm bushings, bars, cables, etc... I even have the original "Cannondale - Hand Made in the USA" and two of the "Cannopndale - Test Rides Here" banner that was up at my local dealer and track back in 2002. Anyway, here are some pictures.

[attachment=11232:Front___right_s.jpg] [attachment=11233:left_s.jpg]
[attachment=11236:red_1_s.jpg] [attachment=11237:Red_2_s.jpg]
[attachment=11229:bumpers_..._flaps_S.jpg] [attachment=11230:C__dale_usa_s.jpg]
[attachment=11231:fenders_s.jpg] [attachment=11234:Manual_s.jpg]
[attachment=11235:Parts_s.jpg] [attachment=11238:Seat_s.jpg]
[attachment=11239:Swingarm_s.jpg]

01FX400 · #4 Post by **01FX400** » Thu Feb 17, 2011 3:21 am

QUOTE (01FX400 @ Feb 17 2011, 03:13 AM) <{POST_SNAPBACK}>

Sorry about that. I'm in Pottstown, Pennsylvania. I'm asking $7400 for everything. They both stared right up last spring, but have sat since. I was going through all the extra parts today, and there is even more there than I remember. Most parts are OEM, and in original packaging. Rear mud flaps, tail light, foot pegs, swingarm bearings, shock bearings, filters, a-arm bushings, bars, cables, etc... I even have the original "Cannondale - Hand Made in the USA" and two of the "Cannopndale - Test Rides Here" banner that was up at my local dealer and track back in 2002. Anyway, here are some pictures.

*** I'm not sure if it is just me, but it will only let me post one picture. Any suggestions on how to post more?

Alright, I'm not seeing the one picture I did upload???? Any suggestions anyone???

kdeal · #5 Post by **kdeal** » Thu Feb 17, 2011 6:49 am

Send the pics to me and I will post them for you.

krdeal at bellsouth dot net

quadracer500 · #6 Post by **quadracer500** » Thu Feb 17, 2011 11:42 am

would you sell one of the banners seperately?

kdeal · #7 Post by **kdeal** » Fri Feb 18, 2011 12:53 am

NEW PICS ABOVE ^^^^^^^^^^^^^^^^^^^

wistech · #8 Post by **wistech** » Fri Feb 18, 2011 8:13 pm

That fx400 swingarm new in the box has got to be one rare find . It would have had to have been purchased before they upgraded to the boxed in design. Pretty cool stuff you have there.