Cannondaleriders

My un updated motor has a cracked case so I am parting out any thing good off the motor let me know what ya need found another motor to buy so tryin to scrounge up some cash
Piston and sleeve are shot

Crank has side to side play but no up and down- needs updated 100

Transmission 100

Have both cartridge plates and all bolts 30 a piece

Have brand new intake cam from boomer 75

Good exhaust cam 50

clutch cover 20

side cover 25- the spot for the clutch cover seal has been broken off so it's a pain to get the clutch cover seal on but it does seal

Head is in good shape valves are junk piston hit them when timing was off $125

$25 for all 4 buckets

Cracked case $100 won't last long has a crack in the crankcase webbing
Let me know what you need I have everything but piston, sleeve, and wristpin. Thanks Kole
In northern Indiana

Also have a flywheel that has not spun and flywheel cover

Timing chain gears 15 bucks
cam gears 10 bucks

If your sure that the exhaust cam is in spec with no sharp edges off the lobe I would take that and maybe take a chance on the crank and the flywheel for $200 shipped to az. Paypal?

Who gives a6 has spoken for the cams he wants to see pics but 160 for crank and flywheel ?

Exhaust cam pic
Also have complete clutch for 75

Text 15748067530 for faster response

cams are still available 75 for intake brand new never ran in motor, 50 for exhaust with decomp attached.

engine oil pickup cover and filter $10 shipped

engine oil supply bridge $10 shipped

Oil filter housing $15 shipped

scavenge idler gear transmisson gear and scavenge pump drive gear $12 shipped

Balance shaft $20 shipped

Throttle body $35 shipped

engine oil pickup cover and filter $10 shipped

engine oil supply bridge $10 shipped

Oil filter housing $15 shipped

scavenge idler gear transmisson gear and scavenge pump drive gear $12 shipped

Balance shaft $20 shipped

Throttle body $35 shipped