2003 Cannibal Part Out

[who_gives_a6]

I'll add items as I find them. Pics upon request if not posted. Shipping included unless specified. Posting prices per forum rules but offers or combined shipping accepted. Respond here or text 7607077897. Recently moved to Mesa, AZ. Trav.
MAKE OFFERS! WORST I CAN SAY IS NO OR COUNTER.

03 Frame: No title but clear through DMV. #196. $90.
Subframe: with grab bar. $40. Will combine frame/subframe for $100.
Swingarm: SOLD!
Axle carrier: Brand new bearings. SOLD!
Moto extended axle: SOLD!
Cannibal rear Ohlins. Rebuilt in 2012 and sitting since. SOLD!
PEP ZPS converted Ohlins rear. Rebuilt over winter and sitting since. SOLD!
Wiring harness: SOLD!
ECU Tray 1: $20
ECU Tray 2: $20
LSR stem: Chrome stock height. SOLD!
Tag CR High T2 bars: SOLD!
Fat bar Mounts: $25.
Foot pegs: $20.
Rear hubs: $40.
Rear hubs: need new studs for wheels. $15.
X-Factor propeg nerfs: with mounts. $125.
AC propeg nerfs: SOLD!
ASR long travel arms: Good shape but chips in powdercoat. Take Moto shocks. Brand new hardware, heims, tie rods/ends. ($275 paid for that!) $320.
Moto Ohlins: SOLD!
Starter: $25.
Complete transmission: Mostly assembled. $40.
Rear brake caliper: Powdercoated orange with pads. $25
Throttle body: with sensors. Standard bore. SOLD!
Throttle body: with sensors. Timbo bored. SOLD!
Front brake calipers: with pads. $40.
Front hubs and rotors: Look good but not personally ran. $40.
Rear rotor hub and rotor: $25.
Rear axle hub: $15.
Handlebar keyswitch mount: has holes from trailtech speedo and status light kit. $15.
Moto handlebar keyswitch mount: Brand new. $10.
Status light kit: Needs new LED's wired on. $15.
13T sprocket: Brand new. $10.
2 Frozen fuel pumps: Repairable? $20 shipped for both.
Tail light: with harness but no bulb. $20.
ATK Seat cover: Never installed. $20.
Engine side cover: Blue. $40.
Engine side cover: Black, needs new powder. $30.
Engine side cover: Chrome. $30.
Front spindles: $30.
Stock Cannibal 03 front end with Arvin shocks: Make offer.
HMF exhaust with header: SOLD!
OMF shrouds: SOLD!
Multiple airboxes: Complete, halves, with or without horns. Make offers on any.
Silver USA Plastic Set: Very good condition. 1 small crack on lower mount hole on rear. Nearly new. Front in stock or race cut; your choice. Includes side spars. $200+Shipping.

ENGINE PARTS:

Aluminum valve cover: SOLD!
Exhaust cam: Good decomp, bearing, etc, but one of the lobes fell victim to a sticky bucket. Worth anything to anyone to work with or remove decomp?
Intake cam: Lobes show some wear. Not sure if worth anything but make offer if interested.
Intake cam: Good lobes but needs a new bearing. SOLD!
Hydraulic case with transmission: Good shape. Has a reweld on back but no issues. $275.
Engine tear down bags: Have all parts to install in engine including cartridge plate, timing setup, gears, oil pumps, etc. $100.
Motorcycle clutch basket/gear: Taller internal gearing. A must on big bore strokers IMO. With plates, springs, screws, etc. $80.
Flywheel: $60.
Crankshaft: From running engine. SOLD!
Ported head: Not sure by who though. No valve buckets or springs but will include a set of used valves for it. SOLD!
Ported head: Complete minus cams. Reangled injectors. $220.

Will discount greatly if you want multiple parts to build this engine. Everything is there but a good exhaust cam.

[who_gives_a6]

More

[who_gives_a6]

More.

[yamadjs08]

Hmm I'm actually in the Phoenix area for work right now...

Any pics of the chrome side cover?

[ShifT714]

I want so many parts right now... But I have so little cash!

[who_gives_a6]

All prices are starting points per forum rules. Will accept offers, combo discounts, etc. Picking up a YFZ450R on Tuesday and need to move some stuff asap!

I'll get a picture of the chrome side cover when home later today. It used to be pretty shiny but has dulled somewhat over time. More of a glimmery silver now.

[who_gives_a6]

It's been awhile since I pulled out the chrome cover and it's a bit faded and has more scratches than I remember. Still not too bad, but would take less for it.

Also have a set of USA silver plastics. The rear plastics are great with decals and have a small crack on a bottom bolt hole, but not too bad. They're dirty in the pics but have only about 3-5hrs in the dunes on them and probably the best set I've seen personally. The side spars have scratches but none severely deep. Graphics were removed though. The fronts I have an option. Both sets are in very good shape with no cracks or damage. Slight discoloration starting on the headlight covers. One set has full fenders as pictures and the other is race cut.

I'll let the buyer pick either unshaved or race cut. Both are nearly identical in condition. However, the non race cut will cost a LOT more in shipping. I've shipped a full set of plastics with race cut front for roughly $30 across country before with the right box, but the full fender will easily surpass the $50 mark, up towards $70-80 sometimes.

I want $200 + shipping for either set. Only selling one. Whichever is bought I will be keeping the other for now.

[speedracer]

Do you have a rubber throttle body boot by chance?

[speedracer]

I will take the standard throttle body,sensors all work?

[who_gives_a6]

I will look for a throttle body boot but don't believe I have an extra at the moment. Tore one and had to use the extra one. Will look though.

I have not ran the throttle body since last October. It has an all original quad that I tore down to rebuild at the time but ran good. Original tires still had the tits on them so very low hours.

-------------------------------------------

List updated.