Page 1 of 1
Diamond Racing A-arms & Shocks
Posted: Wed Oct 15, 2003 11:19 pm
by MotoX_Racer07
I am selling a complete long travel front end on ebay, Check it out ...
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2437824636
A-arm set
Posted: Thu Oct 16, 2003 4:34 pm
by MotoX_Racer07
I am open to offers also ... nothing rediculous though ...
hey
Posted: Mon Oct 20, 2003 11:37 pm
by Cannondale12
I got the diamond racing +3 a-arms for my cannondale and my brake calipers hit the a-arms when turning.. Will diamond racing fix those for free or do i got to pay..
thanks man
Few questions first
Posted: Tue Oct 21, 2003 12:51 am
by MotoX_Racer07
Does your atv have the 03 steering stem or an aftermarket? (this is for the tie rods hitting on the frame when moving through the travel) Do your lower a-arms have the pressed in ball joint (circular) or the one that is threaded with a nut? This will determine if you have the old or new. The old ones had the pressed ball joint. The new ones have the threaded ball joint. Mine were replaced, I know Jim real well and I am sure he will make it right for you.
hey
Posted: Tue Oct 21, 2003 8:45 pm
by Cannondale12
I have Jims aftermarket stem. My balljoints are threaded with a nut too. The reason why i didnt try to find out earlier didn't want to send back and have to wait it was in the middle of season...
thanks man do u have jims number
Your cool then
Posted: Tue Oct 21, 2003 9:55 pm
by MotoX_Racer07
You have the newer design then, All you need to do is shave the nipple down on your caliper and you will be fine. try that ... Go to
www.diamondracingatv.com his number is there. If they are still wrong though they should be fixed ... give him a call and find out ... I havn't even tried the new ones yet to know for sure or not
Posted: Thu Oct 23, 2003 12:34 pm
by Big Winky
Yes, by all means call me! The old design (using the stock ball joint just touches the caliper), and we know about it, thus we'll take care of it for you. PS, call me directly, 8-5, m-f. although if you trim the post on the caliper, they'll clear also.
Reduced!!
Posted: Thu Oct 23, 2003 10:58 pm
by MotoX_Racer07
If anyone is interested in these A-arms & Shocks the price is reduced .... $925 Shipped to your door! .... PM me if interested. Remember these a-arms go for $725 new and plus the shocks another 550 to 600 ... I have 1325 into this front end.
Will separate
Posted: Wed Oct 29, 2003 12:10 am
by MotoX_Racer07
I am willing to separate the shocks and a-arms also. $520 for the shocks, Under 5 hours usage, one weekend riding. A-arms I will do for $575 shipped, 5 hours usage also .. not even used for MX ... pM if interested.
SOLD
Posted: Wed Oct 29, 2003 2:12 am
by MotoX_Racer07
SOLD!!!!!!!!