94 chevy wireing harness v6

Message

cdaleman440 · #1 Post by **cdaleman440** » Wed Feb 15, 2006 9:03 pm

i know this is a long strech but i need one bad help me out
Thanks Austin
PS dont ask me what happened:mad:

cdaleman440 · #2 Post by **cdaleman440** » Wed Feb 15, 2006 9:45 pm

hah well i drilled thro it when running my amp connection to the battery i know im a stupid mo fo

wanablaze · #3 Post by **wanablaze** » Thu Feb 16, 2006 12:00 am

Is it something you could splice back together and shrink wrap? Assuming the wires aren't black and crispy.

cdaleman440 · #4 Post by **cdaleman440** » Thu Feb 16, 2006 1:30 am

well ive tryed many times but i cant get them right i cut about 14 and theres like 3 greens and like 4 blues and 3 blacks so i have no clues what goes where :mad: i love it how i can put systems in all my other freinds car/trucks but i cant do mine im so pissed :mad:
dose anyone know where i can even find one im willing to pay anything
Thanks, Austin

MichiganMXer722 · #5 Post by **MichiganMXer722** » Thu Feb 16, 2006 1:40 am

I'd say go to a local auto salvage yard. Might be your cheapest bet

jwheat · #6 Post by **jwheat** » Thu Feb 16, 2006 1:51 am

It'll be alot easier and cheaper to repair yours than replace it. Where did you drill into the wiring harness? Do you know what systems are affected? Let me know some details and I'll try and get you a wiring diagram. When you repair it, solder the wires and seal them with heat shrink.

cdaleman440 · #7 Post by **cdaleman440** » Thu Feb 16, 2006 2:40 am

Jwheat
its the wires that are on the passenger side going from the cab to the motor im preaty shure its a fuel wire i got mixed up and any thing would be apreacheated thanks ,Austin.
(by the way its a 1994 chevey 2wd v6 vortex w/t
)
MichiganMXer722
I have been to alot of scrap yards and see the problem is the first main part on a truck to go is the motor and all the harness go with it

jwheat · #8 Post by **jwheat** » Thu Feb 16, 2006 6:35 pm

Are there any colored stripes on any of the wires?? Are the blues dark or light and are the greens dark or light? Check and see if you have blown any fuses and , if so, let me know which fuses. You have most likely cut the wires going to the ECM. If you want to call me....you can reach me at 601-209-3139.

Jimbo

cdaleman440 · #9 Post by **cdaleman440** » Thu Feb 16, 2006 9:13 pm

well the blue one are the same and so are the greens and i checked all the fuses and there all fine but my dads ganna pull it to take a better look at it so ill keep ya updated
,Austin