Roller needed

Message
Author
JST
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#1 Post by JST »

I am in the hunt for a roller.Interested in anything right now,long travel,std travel please let me know what ya got.

claas900
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#2 Post by claas900 »

QUOTE (JST @ Nov 28 2009, 08:51 PM) <{POST_SNAPBACK}>
I am in the hunt for a roller.Interested in anything right now,long travel,std travel please let me know what ya got.


where are you out of?

JST
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#3 Post by JST »

QUOTE (claas900 @ Nov 29 2009, 01:07 AM) <{POST_SNAPBACK}>
where are you out of?


Cambrige,Ohio 43725

hartracing3478
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#4 Post by hartracing3478 »

i have two rollers. both 02 cannibals, one is set up for hydo clutch the other is a cable clutch set up. are you looking for a roller with very little work done or something that has had everything replaced, ie: all bearings in chassis and axle carrier, stainless steel fasteners, tag anodized handlebars, black powder coated baja itp beadlocks, new fx400 dark gray plastic, all new high pressure goodyear fuel/ oil hoses, black coated front bumper, axle, and radiator. i would have to take atleast $1,500 for it. the other roller needs new axle carrier bearings, new sprocket, and chain. make me an offer for it.

JST
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#5 Post by JST »

QUOTE (hartracing3478 @ Nov 29 2009, 11:58 AM) <{POST_SNAPBACK}>
i have two rollers. both 02 cannibals, one is set up for hydo clutch the other is a cable clutch set up. are you looking for a roller with very little work done or something that has had everything replaced, ie: all bearings in chassis and axle carrier, stainless steel fasteners, tag anodized handlebars, black powder coated baja itp beadlocks, new fx400 dark gray plastic, all new high pressure goodyear fuel/ oil hoses, black coated front bumper, axle, and radiator. i would have to take atleast $1,500 for it. the other roller needs new axle carrier bearings, new sprocket, and chain. make me an offer for it.


Can you send me pics of each?I wont need anything Cannondale motor related except for the radiator.please send pics of each to mastiff_45@hotmail.com thank you.

hartracing3478
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#6 Post by hartracing3478 »

I will take some pictures tonight and post them on here. thanks. i really dont want to sell either one so i will deffinately have to get what ive got in them. I dont know how much your looking to spend but the cannondale i did a ground up build has the best parts that money can buy on it. I even had the chassis acid dipped

Kuma
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#7 Post by Kuma »

QUOTE (hartracing3478 @ Nov 29 2009, 12:24 PM) <{POST_SNAPBACK}>
I will take some pictures tonight and post them on here. thanks. i really dont want to sell either one so i will deffinately have to get what ive got in them. I dont know how much your looking to spend but the cannondale i did a ground up build has the best parts that money can buy on it. I even had the chassis acid dipped


Acid dipped? was that for cleaning or for lightening?
If lightening what was the before and after weights?

hartracing3478
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#8 Post by hartracing3478 »

for cleaning. acid dipping aluminum takes all the impurities out of the pores and surface.

fearlessfred
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#9 Post by fearlessfred »

QUOTE (JST @ Nov 29 2009, 05:51 AM) <{POST_SNAPBACK}>
I am in the hunt for a roller.Interested in anything right now,long travel,std travel please let me know what ya got.

I have a stock 02 cable clutch with running motor for 1000.00 would consider pulling motor and selling for 800.00 I live in vegas 702 4237111 jam67995@aol.com fred

Gibson265R
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#10 Post by Gibson265R »

I have an 03 cannibal chassis. it has a cracked cradle. The rest of the bike is solid. No front shocks or motor. Everything else is there i.e. ecu, rear shock, tires and wheels, plastic, cracked case, good head, no crank or cams/cam cover, etc... I would like to get $400 for the rest of it. I have all hardware to re-assemble an entire engine, like new clutch pack. Lots of good stuff here for $400. multiple sets of plastics and seats, 2 starter one way bearing setups, 1 good counter balancer, TB, PRM six pack rack w/cooler, etc. I would prefer a local pick-up but I will ship at the buys expense. Im sure there is more that im forgetting. Located in Phoenix AZ. I accept Paypal: markcloc@gmail.com
Please call if you have any questions or if you would like to come check it out. 269 832 5387 Mark

Post Reply